أداة 48 / 136

4-Ply Laminate GSM Calculator — US Units

4-Ply Laminate GSM connects the figures on a US supplier quote with the quantity used by your packaging operation. Build the structure or component list from the supplied specification.

4 أفلام. 3 واجهات لاصقة.

حمّل المثال

كثافة نموذجية. تختلف الكثافة الفعلية حسب درجة الراتنج وتركيبته؛ استخدم بيانات المورد أو القياسات عند توفرها. الوزن المساحي المقاس أو المقدم من المورد أكثر موثوقية عادةً من تقدير بالكثافة. للمواد المخصصة، أدخل كثافة متحققة. لا تستخدم كثافة عامة لتقدير وزن الورق المساحي.

FILM LAYER 01
16.68g/m²

Estimated using typical PET / BOPET density of 1.39 g/cm³.

FILM LAYER 02
24.30g/m²

Estimated using typical رقائق ألومنيوم density of 2.70 g/cm³.

FILM LAYER 03
17.10g/m²

Estimated using typical PA6 / نايلون density of 1.14 g/cm³.

FILM LAYER 04
55.20g/m²

Estimated using typical PE (عام) density of 0.9200 g/cm³.

اللاصق والطباعة والطلاءات

أدخل صفرًا لاستبعاد الإضافة. جميع الأوزان المساحية كتلة جافة متبقية لكل متر مربع. لا تُستنتج سماكة اللاصق والحبر والطلاء من وزنها المساحي.

Adhesive interface 1

وزن الطلاء الجاف المتبقي لكل مساحة

Adhesive interface 2

وزن الطلاء الجاف المتبقي لكل مساحة

Adhesive interface 3

وزن الطلاء الجاف المتبقي لكل مساحة

حبر

الكتلة الجافة المتبقية

طلاء

الكتلة الجافة المتبقية

مادة أخرى متبقية

الكتلة الجافة المتبقية

الوزن المساحي الإجمالي للمادة المركبة119.28g / m²
طبقات الفيلم
113.28 g/m²
اللاصق والحبر والطلاء وغيرها
6.00 g/m²
المساحة الناتجة لكل وحدة كتلة من المادة المركبة
40.93 ft²/lb
سماكة الفيلم فقط
3.78 mil
الوزن لكل 1,000 م²
262.97 lb
مساهمة كل طبقة وإضافة في الكتلة
الطبقة أو الإضافةالوزن المساحي الجاف
1. PET / BOPET16.68
2. رقائق ألومنيوم24.30
3. PA6 / نايلون17.10
4. PE (عام)55.20
Adhesive interface 12.00
Adhesive interface 22.00
Adhesive interface 32.00
حبر · مستبعد0.00
طلاء · مستبعد0.00
مادة أخرى متبقية · مستبعد0.00
الإجمالي119.28

سماكة الفيلم لا تشمل اللاصق والحبر والطلاء. المردود نظري قبل فاقد العملية. يشمل هذا التقدير كثافات نموذجية من المكتبة.

الصيغة والقيم المعوّضة

Layer GSM = Thickness(mil) × 25.4 × Density(g/cm³). Total GSM includes dry retained additions.

Yield(ft²/lb) = 4,882.427636 ÷ Total GSM. Material $/ft² = GSM × 0.0002048161436 × Material $/lb.

PET / BOPET: 0.4724 mil × 25.4 × 1.39 = 16.68 g/m²

رقائق ألومنيوم: 0.3543 mil × 25.4 × 2.70 = 24.30 g/m²

PA6 / نايلون: 0.5906 mil × 25.4 × 1.14 = 17.10 g/m²

PE (عام): 2.36 mil × 25.4 × 0.9200 = 55.20 g/m²

Total retained basis weight: 119.28 g/m²

Yield: 4,882.427636 ÷ 119.28 = 40.93 ft²/lb

المعادلة بوضوح.

4-ply GSM = 25.4 × Σ(Four mil thicknesses × Their densities) + Dry retained additions

Build 4-ply laminate gsm from the actual layer or component records rather than a generic material assumption. Enter dimensional specifications in the displayed US units and keep every price paired with its stated denominator. Review the layer contributions and the finished result together before comparing suppliers.

كيفية استخدام هذه الحاسبة

  1. 01

    Choose the actual materials or components and record their quantities, prices and retained additions.

  2. 02

    Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.

  3. 03

    Review each contribution, then compare the total at the same production quantity and cost boundary.

حساب يمكنك التحقق منه

The worked US scenario below keeps the supplied components, cost boundary and physical quantities explicit. Its dollar prices are illustrative, independent of the interactive example.

This independent 4-ply example has a 0.5-mil PET face at 1.39 g/cm³ and 3 PE layers at 1 mil and 0.92 g/cm³ each. Every interface adds 2 dry GSM of adhesive.

PET price
$2/lb
PE price
$1.25/lb
Wet adhesive
$2/lb · 40% solids
Total basis weight
93.76 g/m²
Coverage yield
52.08 ft²/lb
Material cost
US$0.03132/ft²
Layer GSM = mil × 25.4 × density; Yield(ft²/lb) = 4,882.427636 ÷ Total GSM

These are theoretical material figures. Converting loss, labor, energy and freight are excluded. Dry adhesive is retained mass; its purchased wet mass is divided by 0.40.

الأسئلة الشائعة

Which units should I use for 4-ply laminate gsm?

Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.

Can I compare two 4-ply laminate gsm results directly?

Yes, when both runs use the same specification, purchasing boundary and included charges. Record the component structure and cost basis for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.

تحقق من المعادلة والوحدات والافتراضات المعروضة قبل استخدام النتيجة.

الطريقة والوحدات وافتراضات المواد ↗