Carton Tooling Amortization Calculator — US Units
Carton Tooling Amortization connects the figures on a US supplier quote with the quantity used by your packaging operation. Have cutting die (currency), printing plates (currency), foil tooling (currency) ready before you start.
مواصفاتك
تسمية للوحدة فقط. لا يتم تحويل العملات.
التكلفة لكل عبوة كرتونية
يفترض إنتاج الكمية المدخلة طوال العمر التشغيلي. لا يشمل أدوات الاستبدال اللاحقة.
أدوات الوحدة = (قالب القص + ألواح الطباعة + أدوات الرقائق + أدوات النقش البارز + الإعداد الآخر) ÷ كمية التخصيص
Cutting die: 1200 USD; Printing plates: 600 USD; Foil tooling: 0 USD; Embossing tooling: 0 USD; Other setup: 0 USD; Expected lifetime cartons: 1000000 units → US$0.00180/cartonمحسوب من مدخلاتك. أكّد المواصفات مع المورد.
المعادلة بوضوح.
The result answers a specific purchasing question: Work out carton tooling amortization with US purchasing units. Enter the actual specification and compare the result on a consistent order basis. Read cost per carton in your selected currency/carton. Width and repeat measurements describe the actual purchased web or blank; a finished pack dimension is only interchangeable when the layout really uses that dimension. Keep input prices on the unit printed next to each price field. The US view converts the physical quantity and its price denominator together, so changing units preserves the calculated material or order value.
كيفية استخدام هذه الحاسبة
- 01
Collect Cutting die (currency); Printing plates (currency); Foil tooling (currency); Embossing tooling (currency); Other setup (currency); Expected lifetime cartons (units). Leave optional unknown values blank rather than substituting zero.
- 02
Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.
- 03
Review cost per carton and the secondary outputs. Check the quote boundary, then repeat with the competing specification or order quantity.
حساب يمكنك التحقق منه
For this US purchasing example, enter cutting die US$1,200.00, printing plates US$600.00, foil tooling US$0.00000, embossing tooling US$0.00000. The calculated cost per carton is US$0.00180/carton. The table lists the remaining inputs and results so the scenario can be checked or reproduced.
- أداة القطع
- 1,200 USD
- ألواح الطباعة
- 600 USD
- قوالب الطباعة بالرقائق
- 0 USD
- قوالب النقش البارز
- 0 USD
- إعداد آخر
- 0 USD
- العلب المتوقعة طوال العمر
- 1,000,000 وحدات
Tooling/unit = (Die + Plates + Foil tooling + Embossing tooling + Other setup) ÷ Allocation quantityالأسئلة الشائعة
Which units should I use for carton tooling amortization?
Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.
Can I compare two carton tooling amortization results directly?
Yes, when both runs use the same specification, purchasing boundary and included charges. Record cutting die (currency), printing plates (currency), foil tooling (currency), embossing tooling (currency) for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.
تحقق من المعادلة والوحدات والافتراضات المعروضة قبل استخدام النتيجة.
الطريقة والوحدات وافتراضات المواد ↗