أداة 50 / 136

Laminate Cost per ft² Calculator — US Units

Laminate Cost per ft² connects the figures on a US supplier quote with the quantity used by your packaging operation. Build the structure or component list from the supplied specification.

كوّن البنية طبقةً طبقة.

حمّل المثال

كثافة نموذجية. تختلف الكثافة الفعلية حسب درجة الراتنج وتركيبته؛ استخدم بيانات المورد أو القياسات عند توفرها. الوزن المساحي المقاس أو المقدم من المورد أكثر موثوقية عادةً من تقدير بالكثافة. للمواد المخصصة، أدخل كثافة متحققة. لا تستخدم كثافة عامة لتقدير وزن الورق المساحي.

FILM LAYER 01
16.68g/m²

Estimated using typical PET / BOPET density of 1.39 g/cm³.

FILM LAYER 02
55.20g/m²

Estimated using typical PE (عام) density of 0.9200 g/cm³.

اللاصق والطباعة والطلاءات

أدخل صفرًا لاستبعاد الإضافة. جميع الأوزان المساحية كتلة جافة متبقية لكل متر مربع. أسعار اللاصق تخص المنتج الرطب المورّد؛ تحول نسبة المواد الصلبة وزن الطلاء الجاف إلى استهلاك رطب. أسعار الحبر والطلاء وغيرها لكل كغ جاف متبقٍ. لا تشمل فاقد التحويل والطاقة والعمالة والشحن.

Adhesive interface 1

وزن الطلاء الجاف المتبقي لكل مساحة

حبر

الكتلة الجافة المتبقية

طلاء

الكتلة الجافة المتبقية

مادة أخرى متبقية

الكتلة الجافة المتبقية

إجمالي تكلفة المادةUS$0.1657/ m²
طبقات الفيلم
71.88 g/m²
اللاصق والحبر والطلاء وغيرها
2.00 g/m²
الوزن المساحي الإجمالي للمادة المركبة
73.88 g/m²
المساحة الناتجة لكل وحدة كتلة من المادة المركبة
66.09 ft²/lb
سماكة الفيلم فقط
2.83 mil
الوزن لكل 1,000 م²
162.88 lb
مساهمة كل طبقة وإضافة في الكتلة وتكلفة المادة
الطبقة أو الإضافةالوزن المساحي الجافUSD/m²
1. PET / BOPET16.680.05838
2. PE (عام)55.200.09936
Adhesive interface 12.000.00800
حبر · مستبعد0.000.00000
طلاء · مستبعد0.000.00000
مادة أخرى متبقية · مستبعد0.000.00000
الإجمالي73.880.1657

سماكة الفيلم لا تشمل اللاصق والحبر والطلاء. المردود نظري قبل فاقد العملية. يشمل هذا التقدير كثافات نموذجية من المكتبة.

الصيغة والقيم المعوّضة

Layer GSM = Thickness(mil) × 25.4 × Density(g/cm³). Total GSM includes dry retained additions.

Yield(ft²/lb) = 4,882.427636 ÷ Total GSM. Material $/ft² = GSM × 0.0002048161436 × Material $/lb.

PET / BOPET: 0.4724 mil × 25.4 × 1.39 = 16.68 g/m²; US$1.5876/lb → US$0.00542/ft²

PE (عام): 2.36 mil × 25.4 × 0.9200 = 55.20 g/m²; US$0.8165/lb → US$0.00923/ft²

Total retained basis weight: 73.88 g/m²

Yield: 4,882.427636 ÷ 73.88 = 66.09 ft²/lb

Wet adhesive pounds = Dry pounds ÷ Solids fraction; every addition below is priced on its stated supplied basis.

Adhesive interface 1: US$0.00074/ft²

إجمالي تكلفة المادة: US$0.01540/ft²

المعادلة بوضوح.

Material cost/ft² = Σ(Layer GSM × 0.0002048161436 × Layer price/lb) + Added material cost/ft²

Build laminate cost per ft² from the actual layer or component records rather than a generic material assumption. Enter dimensional specifications in the displayed US units and keep every price paired with its stated denominator. Review the layer contributions and the finished result together before comparing suppliers.

كيفية استخدام هذه الحاسبة

  1. 01

    Choose the actual materials or components and record their quantities, prices and retained additions.

  2. 02

    Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.

  3. 03

    Review each contribution, then compare the total at the same production quantity and cost boundary.

حساب يمكنك التحقق منه

The worked US scenario below keeps the supplied components, cost boundary and physical quantities explicit. Its dollar prices are illustrative, independent of the interactive example.

This independent 2-ply example has a 0.5-mil PET face at 1.39 g/cm³ and 1 PE layer at 1 mil and 0.92 g/cm³ each. Every interface adds 2 dry GSM of adhesive.

PET price
$2/lb
PE price
$1.25/lb
Wet adhesive
$2/lb · 40% solids
Total basis weight
43.02 g/m²
Coverage yield
113.49 ft²/lb
Material cost
US$0.01526/ft²
Layer GSM = mil × 25.4 × density; Yield(ft²/lb) = 4,882.427636 ÷ Total GSM

These are theoretical material figures. Converting loss, labor, energy and freight are excluded. Dry adhesive is retained mass; its purchased wet mass is divided by 0.40.

الأسئلة الشائعة

Which units should I use for laminate cost per ft²?

Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.

Can I compare two laminate cost per ft² results directly?

Yes, when both runs use the same specification, purchasing boundary and included charges. Record the component structure and cost basis for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.

تحقق من المعادلة والوحدات والافتراضات المعروضة قبل استخدام النتيجة.

الطريقة والوحدات وافتراضات المواد ↗