Metal Can Landed Cost Calculator — US Units
Metal Can Landed Cost connects the figures on a US supplier quote with the quantity used by your packaging operation. Have quoted can body price (currency/unit), total material quote (currency), end / lid price per can (currency/unit) ready before you start.
مواصفاتك
تسمية للوحدة فقط. لا يتم تحويل العملات.
التكلفة لكل علبة
تستخدم مبالغ العرض وجميع الرسوم العملة المختارة دون تحويل عملات.
لا تضف الشحن أو المكونات مرة أخرى إذا كان مبلغ العرض يشملها. الرسوم الجمركية مبلغ نقدي مدخل.
التكلفة الواصلة للعلبة = سعر العلبة + سعر الطرف المنفصل + (النقل + القوالب + الرسوم الثابتة الأخرى) ÷ العدد
Quoted can body price: 0.2 USD/unit; End / lid price per can: 0.04 USD/unit; Order quantity: 10000 units; Freight for this order: 250 USD; Tooling allocated to this order: 0 USD; Customs / duty amount: 0 USD; Other fixed order charges: 0 USD → US$0.2650/canمحسوب من مدخلاتك. أكّد المواصفات مع المورد.
المعادلة بوضوح.
The result answers a specific purchasing question: Work out metal can landed cost with US purchasing units. Enter the actual specification and compare the result on a consistent order basis. Read cost per can in your selected currency/can. Width and repeat measurements describe the actual purchased web or blank; a finished pack dimension is only interchangeable when the layout really uses that dimension. Keep input prices on the unit printed next to each price field. The US view converts the physical quantity and its price denominator together, so changing units preserves the calculated material or order value.
كيفية استخدام هذه الحاسبة
- 01
Collect Quoted can body price (currency/unit); Total material quote (currency); End / lid price per can (currency/unit); Order quantity (units); Freight for this order (currency); Tooling allocated to this order (currency); Customs / duty amount (currency); Other fixed order charges (currency). Leave optional unknown values blank rather than substituting zero.
- 02
Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.
- 03
Review cost per can and the secondary outputs. Check the quote boundary, then repeat with the competing specification or order quantity.
حساب يمكنك التحقق منه
For this US purchasing example, enter quoted can body price US$0.2000/unit, end / lid price per can US$0.04000/unit, order quantity 10,000.00 units, freight for this order US$250.00. The calculated cost per can is US$0.2650/can. The table lists the remaining inputs and results so the scenario can be checked or reproduced.
- سعر جسم العلبة المعروض
- 0.2 USD/وحدة
- سعر القاع أو الغطاء لكل علبة
- 0.04 USD/وحدة
- كمية الطلب
- 10,000 وحدات
- شحن هذا الطلب
- 250 USD
- القوالب المخصّصة لهذا الطلب
- 0 USD
- مبلغ الجمارك / الرسوم
- 0 USD
- رسوم ثابتة أخرى للطلب
- 0 USD
Landed/can = Can price + Separate end price + (Freight + Tooling + Other fixed charges) ÷ Quantityالأسئلة الشائعة
Which units should I use for metal can landed cost?
Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.
Can I compare two metal can landed cost results directly?
Yes, when both runs use the same specification, purchasing boundary and included charges. Record quoted can body price (currency/unit), total material quote (currency), end / lid price per can (currency/unit), order quantity (units) for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.
تحقق من المعادلة والوحدات والافتراضات المعروضة قبل استخدام النتيجة.
الطريقة والوحدات وافتراضات المواد ↗