Corrugated Box Material Cost Calculator — US Units
Corrugated Box Material Cost connects the figures on a US supplier quote with the quantity used by your packaging operation. Have actual blank width (inch), actual blank length (inch), actual board gsm (g/m²) ready before you start.
Ihre Spezifikationen
Nur Einheitenbezeichnung. Keine Währungsumrechnung.
Kartonmaterialkosten je Zuschnitt
Verwendet tatsächliche Zuschnittmaße. Fertige Innen- oder Außenmaße der Verpackung bestimmen keinen exakten Stanzzuschnitt.
Drucken, Schneiden und Kleben sind nur enthalten, wenn sie im Feld für zusätzliche Verarbeitung eingegeben wurden. Prozessabfall ist nicht enthalten.
Blank cost = Area(ft²) × Price/ft²; Price/ft² = Board GSM × 0.0002048161436 × Price/lb
Actual blank width: 19.68503937007874 inch; Actual blank length: 15.748031496062993 inch; Actual board GSM: 500 g/m²; Board price on selected basis: 0.36287389600000003 USD/lb; Converting / printing / gluing per box: 0 USD/unit → US$0,08000/blankAus Ihren Eingaben berechnet. Bestätigen Sie die Spezifikationen mit Ihrem Lieferanten.
Die Formel verständlich erklärt.
The result answers a specific purchasing question: Work out corrugated box material cost with US purchasing units. Enter the actual specification and compare the result on a consistent order basis. Read board material cost per blank in your selected currency/blank. Width and repeat measurements describe the actual purchased web or blank; a finished pack dimension is only interchangeable when the layout really uses that dimension. Keep input prices on the unit printed next to each price field. The US view converts the physical quantity and its price denominator together, so changing units preserves the calculated material or order value.
So verwenden Sie diesen Rechner
- 01
Collect Actual blank width (inch); Actual blank length (inch); Actual board GSM (g/m²); Board price on selected basis (currency/lb); Converting / printing / gluing per box (currency/unit). Leave optional unknown values blank rather than substituting zero.
- 02
Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.
- 03
Review board material cost per blank and the secondary outputs. Check the quote boundary, then repeat with the competing specification or order quantity.
Eine überprüfbare Berechnung
For this US purchasing example, enter actual blank width 19.69 inch, actual blank length 15.75 inch, actual board gsm 500.00 g/m², board price on selected basis US$0.3629/lb. The calculated board material cost per blank is US$0.08000/blank. The table lists the remaining inputs and results so the scenario can be checked or reproduced.
- Tatsächliche Zuschnittbreite
- 19,6850394 inch
- Tatsächliche Zuschnittlänge
- 15,7480315 inch
- Tatsächliches Kartonflächengewicht
- 500 g/m²
- Kartonpreis auf gewählter Basis
- 0,362873896 USD/lb
- Verarbeitung / Druck / Klebung je Karton
- 0 USD/Einheit
Blank cost = Area(ft²) × Price/ft²; Price/ft² = Board GSM × 0.0002048161436 × Price/lbHäufige Fragen
Which units should I use for corrugated box material cost?
Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.
Can I compare two corrugated box material cost results directly?
Yes, when both runs use the same specification, purchasing boundary and included charges. Record actual blank width (inch), actual blank length (inch), actual board gsm (g/m²), board price on selected basis (currency/lb) for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.
Prüfen Sie die angezeigte Formel, die Einheiten und die Annahmen, bevor Sie das Ergebnis verwenden.
Methode, Einheiten und Materialannahmen ↗