WERKZEUG 08 / 136

Delivered Film Cost Calculator — US Units

Delivered Film Cost connects the figures on a US supplier quote with the quantity used by your packaging operation. Have quoted material quantity (lb), material price on selected basis (currency/lb), freight (currency) ready before you start.

Ihre Spezifikationen

lb
USD/lb

Nur Währungsangabe. Keine Währungsumrechnung.

USD
USD
USD
USD
g/m²

Für die Umrechnung zwischen kg und m² erforderlich.

Ergebnisse werden beim Bearbeiten aktualisiert. Gespeichert wird erst auf Ihre Anweisung.
Laufende Berechnung

Gesamte Einstandskosten

US$3.300,00
MaterialzwischensummeUS$3.000,00
ZusatzkostenUS$300,00
Effective landed price per lbUS$1,4969/lb
Effective landed price per ft²US$0,02453/ft²
Zusatzkosten / Materialzwischensumme10,00 %

Alle Beträge verwenden die gewählte Währung; es erfolgt keine Währungsumrechnung.

Zoll wird als Geldbetrag eingegeben, nicht als automatisch berechneter Steuersatz.

Einstandskosten = Angebotsmenge × Stückpreis + Fracht + Zuschlag + Zoll + Sonstige Kosten

Quoted material quantity: 2204.6226218487755 lb; Material price on selected basis: 1.3607771100000001 USD/lb; Freight: 250 USD; Surcharges: 50 USD; Customs / duty amount: 0 USD; Other fixed charges: 0 USD; Film GSM: 80 g/m² → US$3.300,00

Aus Ihren Eingaben berechnet. Bestätigen Sie die Spezifikationen mit Ihrem Lieferanten.

Die Formel verständlich erklärt.

Einstandskosten = Angebotsmenge × Stückpreis + Fracht + Zuschlag + Zoll + Sonstige Kosten

The result answers a specific purchasing question: Work out delivered film cost with US purchasing units. Enter the actual specification and compare the result on a consistent order basis. Read total landed cost in your selected currency. Width and repeat measurements describe the actual purchased web or blank; a finished pack dimension is only interchangeable when the layout really uses that dimension. Keep input prices on the unit printed next to each price field. The US view converts the physical quantity and its price denominator together, so changing units preserves the calculated material or order value.

So verwenden Sie diesen Rechner

  1. 01

    Collect Quoted material quantity (lb); Material price on selected basis (currency/lb); Freight (currency); Surcharges (currency); Customs / duty amount (currency); Other fixed charges (currency); Film GSM (g/m²); Net film weight per roll (lb). Leave optional unknown values blank rather than substituting zero.

  2. 02

    Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.

  3. 03

    Review total landed cost and the secondary outputs. Check the quote boundary, then repeat with the competing specification or order quantity.

Eine überprüfbare Berechnung

For this US purchasing example, enter quoted material quantity 2,204.62 lb, material price on selected basis US$1.3608/lb, freight US$250.00, surcharges US$50.00. The calculated total landed cost is US$3,300.00. The table lists the remaining inputs and results so the scenario can be checked or reproduced.

Angebotene Materialmenge
2.204,62262 lb
Materialpreis auf gewählter Basis
1,36077711 USD/lb
Fracht
250 USD
Zuschläge
50 USD
Zollbetrag
0 USD
Weitere feste Kosten
0 USD
Flächengewicht der Folie
80 g/m²
Landed cost = Quoted quantity × Unit price + Freight + Surcharge + Duty + Other charges
Gesamte EinstandskostenUS$3.300,00

Häufige Fragen

Which units should I use for delivered film cost?

Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.

Can I compare two delivered film cost results directly?

Yes, when both runs use the same specification, purchasing boundary and included charges. Record quoted material quantity (lb), material price on selected basis (currency/lb), freight (currency), surcharges (currency) for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.

Prüfen Sie die angezeigte Formel, die Einheiten und die Annahmen, bevor Sie das Ergebnis verwenden.

Methode, Einheiten und Materialannahmen ↗