Folding Carton Weight Calculator — US Units
Folding Carton Weight connects the figures on a US supplier quote with the quantity used by your packaging operation. Have actual blank width (inch), actual blank length (inch), actual paperboard gsm (g/m²) ready before you start.
Ihre Spezifikationen
Geschätztes Faltschachtelkartongewicht
Verwendet tatsächliche Zuschnittmaße. Fertige Innen- oder Außenmaße der Verpackung bestimmen keinen exakten Stanzzuschnitt.
Der Ausschnittanteil beschreibt entferntes Material aus diesem Zuschnitt, nicht den Produktionsverlust. Klebstoffe, Farbe und Zubehör sind nur enthalten, wenn sie in der gemessenen Grammatur stecken.
Retained board lb = Blank area(ft²) × GSM × 0.0002048161436 × (1 − Removal fraction)
Actual blank width: 19.68503937007874 inch; Actual blank length: 15.748031496062993 inch; Actual paperboard GSM: 300 g/m²; Blank area removed by cutouts: 0 % → 0,1323 lb/cartonAus Ihren Eingaben berechnet. Bestätigen Sie die Spezifikationen mit Ihrem Lieferanten.
Die Formel verständlich erklärt.
The result answers a specific purchasing question: Work out folding carton weight with US purchasing units. Enter the actual specification and compare the result on a consistent order basis. Read estimated carton board weight in lb/carton. Width and repeat measurements describe the actual purchased web or blank; a finished pack dimension is only interchangeable when the layout really uses that dimension. Keep input prices on the unit printed next to each price field. The US view converts the physical quantity and its price denominator together, so changing units preserves the calculated material or order value.
So verwenden Sie diesen Rechner
- 01
Collect Actual blank width (inch); Actual blank length (inch); Actual paperboard GSM (g/m²); Blank area removed by cutouts (%). Leave optional unknown values blank rather than substituting zero.
- 02
Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.
- 03
Review estimated carton board weight and the secondary outputs. Check the quote boundary, then repeat with the competing specification or order quantity.
Eine überprüfbare Berechnung
For this US purchasing example, enter actual blank width 19.69 inch, actual blank length 15.75 inch, actual paperboard gsm 300.00 g/m², blank area removed by cutouts 0.00 %. The calculated estimated carton board weight is 0.1323 lb/carton. The table lists the remaining inputs and results so the scenario can be checked or reproduced.
- Tatsächliche Zuschnittbreite
- 19,6850394 inch
- Tatsächliche Zuschnittlänge
- 15,7480315 inch
- Tatsächliches Kartonflächengewicht
- 300 g/m²
- Durch Ausschnitte entfernte Zuschnittfläche
- 0 %
Retained board lb = Blank area(ft²) × GSM × 0.0002048161436 × (1 − Removal fraction)Häufige Fragen
Which units should I use for folding carton weight?
Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.
Can I compare two folding carton weight results directly?
Yes, when both runs use the same specification, purchasing boundary and included charges. Record actual blank width (inch), actual blank length (inch), actual paperboard gsm (g/m²), blank area removed by cutouts (%) for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.
Prüfen Sie die angezeigte Formel, die Einheiten und die Annahmen, bevor Sie das Ergebnis verwenden.
Methode, Einheiten und Materialannahmen ↗