WERKZEUG 50 / 136

Laminate Cost per ft² Calculator — US Units

Laminate Cost per ft² connects the figures on a US supplier quote with the quantity used by your packaging operation. Build the structure or component list from the supplied specification.

Aufbau Schicht für Schicht erstellen.

Beispiel laden

Typische Dichte. Die tatsächliche Dichte hängt von Harztyp und Rezeptur ab; verwenden Sie nach Möglichkeit Lieferanten- oder Messdaten. Gemessene oder vom Lieferanten angegebene Grammatur ist meist verlässlicher als eine Dichteschätzung. Für eigene Materialien geprüfte Dichte eingeben. Papiergrammatur nicht aus einer allgemeinen Dichte schätzen.

FILM LAYER 01
16,68g/m²

Estimated using typical PET / BOPET density of 1,39 g/cm³.

FILM LAYER 02
55,20g/m²

Estimated using typical PE (allgemein) density of 0,9200 g/cm³.

Klebstoff, Druck und Beschichtungen

Für ausgeschlossene Zusätze null eingeben. Alle Grammaturwerte sind verbleibende Trockenmasse je Quadratmeter. Klebstoffpreise gelten für das gelieferte Nassprodukt; der Feststoffanteil rechnet trockenen Auftrag in Nassverbrauch um. Farbe, Beschichtung und Sonstiges werden je verbleibendem Trockenkilogramm bepreist. Ohne Verarbeitungsverluste, Energie, Arbeit und Fracht.

Adhesive interface 1

Verbleibendes trockenes Auftragsgewicht

Druckfarbe

Verbleibende Trockenmasse

Beschichtung

Verbleibende Trockenmasse

Sonstiges verbleibendes Material

Verbleibende Trockenmasse

Gesamte MaterialkostenUS$0,1657/ m²
Folienschichten
71,88 g/m²
Klebstoff, Farbe, Beschichtung und Sonstiges
2,00 g/m²
Gesamte Laminatgrammatur
73,88 g/m²
Laminatergiebigkeit
66,09 ft²/lb
Nur Foliendicke
2,83 mil
Gewicht je 1.000 m²
162,88 lb
Masse- und Materialkostenbeitrag jeder Schicht und jedes Zusatzes
Schicht oder ZusatzTrockengrammaturUSD/m²
1. PET / BOPET16,680,05838
2. PE (allgemein)55,200,09936
Adhesive interface 12,000,00800
Druckfarbe · ausgeschlossen0,000,00000
Beschichtung · ausgeschlossen0,000,00000
Sonstiges verbleibendes Material · ausgeschlossen0,000,00000
Gesamt73,880,1657

Die Foliendicke schließt Klebstoff, Farbe und Beschichtung aus. Die Ergiebigkeit ist theoretisch, vor Prozessverlusten. Diese Schätzung verwendet typische Dichten aus der Materialbibliothek.

Formel und eingesetzte Werte

Layer GSM = Thickness(mil) × 25.4 × Density(g/cm³). Total GSM includes dry retained additions.

Yield(ft²/lb) = 4,882.427636 ÷ Total GSM. Material $/ft² = GSM × 0.0002048161436 × Material $/lb.

PET / BOPET: 0,4724 mil × 25.4 × 1,39 = 16,68 g/m²; US$1,5876/lb → US$0,00542/ft²

PE (allgemein): 2,36 mil × 25.4 × 0,9200 = 55,20 g/m²; US$0,8165/lb → US$0,00923/ft²

Total retained basis weight: 73,88 g/m²

Yield: 4,882.427636 ÷ 73,88 = 66,09 ft²/lb

Wet adhesive pounds = Dry pounds ÷ Solids fraction; every addition below is priced on its stated supplied basis.

Adhesive interface 1: US$0,00074/ft²

Materialkosten gesamt: US$0,01540/ft²

Die Formel verständlich erklärt.

Material cost/ft² = Σ(Layer GSM × 0.0002048161436 × Layer price/lb) + Added material cost/ft²

Build laminate cost per ft² from the actual layer or component records rather than a generic material assumption. Enter dimensional specifications in the displayed US units and keep every price paired with its stated denominator. Review the layer contributions and the finished result together before comparing suppliers.

So verwenden Sie diesen Rechner

  1. 01

    Choose the actual materials or components and record their quantities, prices and retained additions.

  2. 02

    Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.

  3. 03

    Review each contribution, then compare the total at the same production quantity and cost boundary.

Eine überprüfbare Berechnung

The worked US scenario below keeps the supplied components, cost boundary and physical quantities explicit. Its dollar prices are illustrative, independent of the interactive example.

This independent 2-ply example has a 0.5-mil PET face at 1.39 g/cm³ and 1 PE layer at 1 mil and 0.92 g/cm³ each. Every interface adds 2 dry GSM of adhesive.

PET price
$2/lb
PE price
$1.25/lb
Wet adhesive
$2/lb · 40% solids
Total basis weight
43,02 g/m²
Coverage yield
113,49 ft²/lb
Material cost
US$0,01526/ft²
Layer GSM = mil × 25.4 × density; Yield(ft²/lb) = 4,882.427636 ÷ Total GSM

These are theoretical material figures. Converting loss, labor, energy and freight are excluded. Dry adhesive is retained mass; its purchased wet mass is divided by 0.40.

Häufige Fragen

Which units should I use for laminate cost per ft²?

Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.

Can I compare two laminate cost per ft² results directly?

Yes, when both runs use the same specification, purchasing boundary and included charges. Record the component structure and cost basis for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.

Prüfen Sie die angezeigte Formel, die Einheiten und die Annahmen, bevor Sie das Ergebnis verwenden.

Methode, Einheiten und Materialannahmen ↗