Laminate Yield Calculator — US Units
Laminate Yield connects the figures on a US supplier quote with the quantity used by your packaging operation. Build the structure or component list from the supplied specification.
Aufbau Schicht für Schicht erstellen.
Typische Dichte. Die tatsächliche Dichte hängt von Harztyp und Rezeptur ab; verwenden Sie nach Möglichkeit Lieferanten- oder Messdaten. Gemessene oder vom Lieferanten angegebene Grammatur ist meist verlässlicher als eine Dichteschätzung. Für eigene Materialien geprüfte Dichte eingeben. Papiergrammatur nicht aus einer allgemeinen Dichte schätzen.
Klebstoff, Druck und Beschichtungen
Für ausgeschlossene Zusätze null eingeben. Alle Grammaturwerte sind verbleibende Trockenmasse je Quadratmeter. Klebstoff-, Farb- und Beschichtungsdicke werden nicht aus ihrer Grammatur abgeleitet.
Verbleibendes trockenes Auftragsgewicht
Verbleibende Trockenmasse
Verbleibende Trockenmasse
Verbleibende Trockenmasse
- Folienschichten
- 71,88 g/m²
- Klebstoff, Farbe, Beschichtung und Sonstiges
- 2,00 g/m²
- Gesamte Laminatgrammatur
- 73,88 g/m²
- Nur Foliendicke
- 2,83 mil
- Gewicht je 1.000 m²
- 162,88 lb
| Schicht oder Zusatz | Trockengrammatur |
|---|---|
| 1. PET / BOPET | 16,68 |
| 2. PE (allgemein) | 55,20 |
| Adhesive interface 1 | 2,00 |
| Druckfarbe · ausgeschlossen | 0,00 |
| Beschichtung · ausgeschlossen | 0,00 |
| Sonstiges verbleibendes Material · ausgeschlossen | 0,00 |
| Gesamt | 73,88 |
Die Foliendicke schließt Klebstoff, Farbe und Beschichtung aus. Die Ergiebigkeit ist theoretisch, vor Prozessverlusten. Diese Schätzung verwendet typische Dichten aus der Materialbibliothek.
Formel und eingesetzte Werte
Layer GSM = Thickness(mil) × 25.4 × Density(g/cm³). Total GSM includes dry retained additions.
Yield(ft²/lb) = 4,882.427636 ÷ Total GSM. Material $/ft² = GSM × 0.0002048161436 × Material $/lb.
PET / BOPET: 0,4724 mil × 25.4 × 1,39 = 16,68 g/m²
PE (allgemein): 2,36 mil × 25.4 × 0,9200 = 55,20 g/m²
Total retained basis weight: 73,88 g/m²
Yield: 4,882.427636 ÷ 73,88 = 66,09 ft²/lb
Die Formel verständlich erklärt.
Build laminate yield from the actual layer or component records rather than a generic material assumption. Enter dimensional specifications in the displayed US units and keep every price paired with its stated denominator. Review the layer contributions and the finished result together before comparing suppliers.
So verwenden Sie diesen Rechner
- 01
Choose the actual materials or components and record their quantities, prices and retained additions.
- 02
Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.
- 03
Review each contribution, then compare the total at the same production quantity and cost boundary.
Eine überprüfbare Berechnung
The worked US scenario below keeps the supplied components, cost boundary and physical quantities explicit. Its dollar prices are illustrative, independent of the interactive example.
This independent 2-ply example has a 0.5-mil PET face at 1.39 g/cm³ and 1 PE layer at 1 mil and 0.92 g/cm³ each. Every interface adds 2 dry GSM of adhesive.
- PET price
- $2/lb
- PE price
- $1.25/lb
- Wet adhesive
- $2/lb · 40% solids
- Total basis weight
- 43,02 g/m²
- Coverage yield
- 113,49 ft²/lb
- Material cost
- US$0,01526/ft²
Layer GSM = mil × 25.4 × density; Yield(ft²/lb) = 4,882.427636 ÷ Total GSMThese are theoretical material figures. Converting loss, labor, energy and freight are excluded. Dry adhesive is retained mass; its purchased wet mass is divided by 0.40.
Häufige Fragen
Which units should I use for laminate yield?
Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.
Can I compare two laminate yield results directly?
Yes, when both runs use the same specification, purchasing boundary and included charges. Record the component structure and cost basis for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.
Prüfen Sie die angezeigte Formel, die Einheiten und die Annahmen, bevor Sie das Ergebnis verwenden.
Methode, Einheiten und Materialannahmen ↗