WERKZEUG 19 / 136

mils to GSM Calculator — US Units

mils to GSM connects the figures on a US supplier quote with the quantity used by your packaging operation. Have film thickness (mil), material density (g/cm³) ready before you start.

Ihre Spezifikationen

g/cm³

Typische Dichte. Die tatsächliche Dichte hängt von Harztyp und Rezeptur ab; verwenden Sie nach Möglichkeit Lieferanten- oder Messdaten.

Ergebnisse werden beim Bearbeiten aktualisiert. Gespeichert wird erst auf Ihre Anweisung.
Laufende Berechnung

Geschätzte Foliengrammatur

16,68 g/m²
Geschätzte Folienergiebigkeit292,71 ft²/lb

Estimated using typical PET / BOPET density of 1.39 g/cm³. Actual density varies by resin grade and formulation.

Berechnen Sie bei Laminaten jede Materialschicht einzeln. Verwenden Sie für Papier keine allgemeine Dichte.

GSM = Thickness(mil) × 25.4 × Density(g/cm³)

Film thickness: 0.47244094488188976 mil; Material density: 1.39 g/cm³ → 16,68 g/m²

Aus Ihren Eingaben berechnet. Bestätigen Sie die Spezifikationen mit Ihrem Lieferanten.

Die Formel verständlich erklärt.

GSM = Thickness(mil) × 25.4 × Density(g/cm³)

The result answers a specific purchasing question: Work out mils to gsm with US purchasing units. Enter the actual specification and compare the result on a consistent order basis. Read estimated film gsm in g/m². Width and repeat measurements describe the actual purchased web or blank; a finished pack dimension is only interchangeable when the layout really uses that dimension. Keep input prices on the unit printed next to each price field. The US view converts the physical quantity and its price denominator together, so changing units preserves the calculated material or order value.

So verwenden Sie diesen Rechner

  1. 01

    Collect Film thickness (mil); Material density (g/cm³). Leave optional unknown values blank rather than substituting zero.

  2. 02

    Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.

  3. 03

    Review estimated film gsm and the secondary outputs. Check the quote boundary, then repeat with the competing specification or order quantity.

Eine überprüfbare Berechnung

For this US purchasing example, enter film thickness 0.4724 mil, material density 1.39 g/cm³. The calculated estimated film gsm is 16.68 g/m². The table lists the remaining inputs and results so the scenario can be checked or reproduced.

Foliendicke
0,472440945 Mil
Materialdichte
1,39 g/cm³
GSM = Thickness(mil) × 25.4 × Density(g/cm³)
Geschätzte Foliengrammatur16,68 g/m²

Häufige Fragen

Which units should I use for mils to gsm?

Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.

Can I compare two mils to gsm results directly?

Yes, when both runs use the same specification, purchasing boundary and included charges. Record film thickness (mil), material density (g/cm³) for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.

Prüfen Sie die angezeigte Formel, die Einheiten und die Annahmen, bevor Sie das Ergebnis verwenden.

Methode, Einheiten und Materialannahmen ↗