WERKZEUG 17 / 136

Supplier Switch Savings Calculator — US Units

Supplier Switch Savings connects the figures on a US supplier quote with the quantity used by your packaging operation. Have current landed price (currency/lb), proposed landed price (currency/lb), annual volume on selected basis (lb) ready before you start.

Ihre Spezifikationen

USD/lb
USD/lb
lb
USD

Nur Währungsangabe. Keine Währungsumrechnung.

Ergebnisse werden beim Bearbeiten aktualisiert. Gespeichert wird erst auf Ihre Anweisung.
Laufende Berechnung

Jährliche Bruttoeinsparung

US$10.000,00/year
Nettoeinsparung im ersten JahrUS$5.000,00
Stückpreissenkung6,25 %
Amortisationsmenge55.115,57 lb
Amortisationsdauer6,00 months

Die Amortisationsdauer setzt gleichmäßige Einkäufe über das Jahr voraus.

Prüfen Sie vor der Lieferantenwahl gleichwertige Spezifikationen, Leistungen, Währungen und Geschäftsbedingungen.

Jahreseinsparung = (Aktueller Preis − Neuer Preis) × Jahresmenge; Amortisationsmenge = Wechselkosten ÷ Stückersparnis

Current landed price: 1.4514955840000001 USD/lb; Proposed landed price: 1.3607771100000001 USD/lb; Annual volume on selected basis: 110231.13109243878 lb; One-time switching / tooling / testing: 5000 USD → US$10.000,00/year

Aus Ihren Eingaben berechnet. Bestätigen Sie die Spezifikationen mit Ihrem Lieferanten.

Die Formel verständlich erklärt.

Jahreseinsparung = (Aktueller Preis − Neuer Preis) × Jahresmenge; Amortisationsmenge = Wechselkosten ÷ Stückersparnis

The result answers a specific purchasing question: Work out supplier switch savings with US purchasing units. Enter the actual specification and compare the result on a consistent order basis. Read annual gross savings in your selected currency/year. Width and repeat measurements describe the actual purchased web or blank; a finished pack dimension is only interchangeable when the layout really uses that dimension. Keep input prices on the unit printed next to each price field. The US view converts the physical quantity and its price denominator together, so changing units preserves the calculated material or order value.

So verwenden Sie diesen Rechner

  1. 01

    Collect Current landed price (currency/lb); Proposed landed price (currency/lb); Annual volume on selected basis (lb); One-time switching / tooling / testing (currency). Leave optional unknown values blank rather than substituting zero.

  2. 02

    Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.

  3. 03

    Review annual gross savings and the secondary outputs. Check the quote boundary, then repeat with the competing specification or order quantity.

Eine überprüfbare Berechnung

For this US purchasing example, enter current landed price US$1.4515/lb, proposed landed price US$1.3608/lb, annual volume on selected basis 110,231.13 lb, one-time switching / tooling / testing US$5,000.00. The calculated annual gross savings is US$10,000.00/year. The table lists the remaining inputs and results so the scenario can be checked or reproduced.

Aktueller Einstandspreis
1,45149558 USD/lb
Vorgeschlagener Einstandspreis
1,36077711 USD/lb
Jahresvolumen auf gewählter Basis
110.231,131 lb
Einmaliger Wechsel / Werkzeuge / Prüfungen
5.000 USD
Annual savings = (Current price − Proposed price) × Annual volume; Break-even volume = Switching cost ÷ Unit saving
Jährliche BruttoeinsparungUS$10.000,00/year

Häufige Fragen

Which units should I use for supplier switch savings?

Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.

Can I compare two supplier switch savings results directly?

Yes, when both runs use the same specification, purchasing boundary and included charges. Record current landed price (currency/lb), proposed landed price (currency/lb), annual volume on selected basis (lb), one-time switching / tooling / testing (currency) for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.

Prüfen Sie die angezeigte Formel, die Einheiten und die Annahmen, bevor Sie das Ergebnis verwenden.

Methode, Einheiten und Materialannahmen ↗