Corrugated Box Weight Calculator — US Units
Corrugated Box Weight connects the figures on a US supplier quote with the quantity used by your packaging operation. Have actual blank width (inch), actual blank length (inch), actual board gsm (g/m²) ready before you start.
Tus especificaciones
Peso estimado del cartón de la caja
Usa las dimensiones reales del recorte. Las dimensiones interiores o exteriores del envase terminado no definen un recorte de troquel exacto.
El porcentaje de vaciado describe el material retirado de este recorte, no la pérdida de rendimiento de producción. Adhesivos, tinta y accesorios se excluyen salvo inclusión en el gramaje medido.
Retained board lb = Blank length(in) × Blank width(in) ÷ 144 × Board GSM × 0.0002048161436 × (1 − Removal fraction)
Actual blank width: 19.68503937007874 inch; Actual blank length: 15.748031496062993 inch; Actual board GSM: 500 g/m²; Blank material removed by cutouts: 0 % → 0,2205 lb/boxCalculado con tus datos. Confirma las especificaciones con tu proveedor.
La fórmula, explicada.
The result answers a specific purchasing question: Work out corrugated box weight with US purchasing units. Enter the actual specification and compare the result on a consistent order basis. Read estimated box board weight in lb/box. Width and repeat measurements describe the actual purchased web or blank; a finished pack dimension is only interchangeable when the layout really uses that dimension. Keep input prices on the unit printed next to each price field. The US view converts the physical quantity and its price denominator together, so changing units preserves the calculated material or order value.
Cómo usar esta calculadora
- 01
Collect Actual blank width (inch); Actual blank length (inch); Actual board GSM (g/m²); Blank material removed by cutouts (%). Leave optional unknown values blank rather than substituting zero.
- 02
Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.
- 03
Review estimated box board weight and the secondary outputs. Check the quote boundary, then repeat with the competing specification or order quantity.
Un cálculo que puedes comprobar
For this US purchasing example, enter actual blank width 19.69 inch, actual blank length 15.75 inch, actual board gsm 500.00 g/m², blank material removed by cutouts 0.00 %. The calculated estimated box board weight is 0.2205 lb/box. The table lists the remaining inputs and results so the scenario can be checked or reproduced.
- Ancho real del desarrollo
- 19,6850394 inch
- Longitud real del desarrollo
- 15,7480315 inch
- Gramaje real del cartón
- 500 g/m²
- Material del desarrollo retirado por recortes
- 0 %
Retained board lb = Blank length(in) × Blank width(in) ÷ 144 × Board GSM × 0.0002048161436 × (1 − Removal fraction)Preguntas frecuentes
Which units should I use for corrugated box weight?
Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.
Can I compare two corrugated box weight results directly?
Yes, when both runs use the same specification, purchasing boundary and included charges. Record actual blank width (inch), actual blank length (inch), actual board gsm (g/m²), blank material removed by cutouts (%) for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.
Comprueba la fórmula, las unidades y los supuestos mostrados antes de utilizar el resultado.
Método, unidades y supuestos del material ↗