HERRAMIENTA 50 / 136

Laminate Cost per ft² Calculator — US Units

Laminate Cost per ft² connects the figures on a US supplier quote with the quantity used by your packaging operation. Build the structure or component list from the supplied specification.

Construya la estructura capa a capa.

Cargar ejemplo

Densidad típica. La densidad real varía según el grado y la formulación de la resina; utilice datos del proveedor o medidos cuando estén disponibles. El gramaje medido o del proveedor suele ser más fiable que una estimación por densidad. Para materiales personalizados, introduzca una densidad verificada. No use densidad genérica para estimar el gramaje del papel.

FILM LAYER 01
16,68g/m²

Estimated using typical PET / BOPET density of 1,39 g/cm³.

FILM LAYER 02
55,20g/m²

Estimated using typical PE (genérico) density of 0,9200 g/cm³.

Adhesivo, impresión y recubrimientos

Introduzca cero para excluir una adición. Todos los gramajes son masa seca retenida por metro cuadrado. Los precios de adhesivo corresponden al producto húmedo suministrado; el porcentaje de sólidos convierte gramaje seco en consumo húmedo. Tinta, recubrimiento y otros se cotizan por kg seco retenido. Excluye pérdidas de transformación, energía, mano de obra y transporte.

Adhesive interface 1

Gramaje seco retenido de recubrimiento

Tinta

Masa seca retenida

Recubrimiento

Masa seca retenida

Otro material retenido

Masa seca retenida

Coste total de materialUS$0,1657/ m²
Capas de película
71,88 g/m²
Adhesivo, tinta, recubrimiento y otros
2,00 g/m²
Gramaje total del laminado
73,88 g/m²
Rendimiento del laminado
66,09 ft²/lb
Solo espesor de película
2,83 mil
Peso por 1.000 m²
162,88 lb
Contribución de masa y coste de material de cada capa y adición
Capa o adiciónGramaje secoUSD/m²
1. PET / BOPET16,680,05838
2. PE (genérico)55,200,09936
Adhesive interface 12,000,00800
Tinta · excluido0,000,00000
Recubrimiento · excluido0,000,00000
Otro material retenido · excluido0,000,00000
Total73,880,1657

El espesor de película excluye adhesivo, tinta y recubrimiento. El rendimiento es teórico, antes de mermas. Esta estimación incluye densidades típicas de la biblioteca.

Fórmula y valores sustituidos

Layer GSM = Thickness(mil) × 25.4 × Density(g/cm³). Total GSM includes dry retained additions.

Yield(ft²/lb) = 4,882.427636 ÷ Total GSM. Material $/ft² = GSM × 0.0002048161436 × Material $/lb.

PET / BOPET: 0,4724 mil × 25.4 × 1,39 = 16,68 g/m²; US$1,5876/lb → US$0,00542/ft²

PE (genérico): 2,36 mil × 25.4 × 0,9200 = 55,20 g/m²; US$0,8165/lb → US$0,00923/ft²

Total retained basis weight: 73,88 g/m²

Yield: 4,882.427636 ÷ 73,88 = 66,09 ft²/lb

Wet adhesive pounds = Dry pounds ÷ Solids fraction; every addition below is priced on its stated supplied basis.

Adhesive interface 1: US$0,00074/ft²

Coste total de material: US$0,01540/ft²

La fórmula, explicada.

Material cost/ft² = Σ(Layer GSM × 0.0002048161436 × Layer price/lb) + Added material cost/ft²

Build laminate cost per ft² from the actual layer or component records rather than a generic material assumption. Enter dimensional specifications in the displayed US units and keep every price paired with its stated denominator. Review the layer contributions and the finished result together before comparing suppliers.

Cómo usar esta calculadora

  1. 01

    Choose the actual materials or components and record their quantities, prices and retained additions.

  2. 02

    Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.

  3. 03

    Review each contribution, then compare the total at the same production quantity and cost boundary.

Un cálculo que puedes comprobar

The worked US scenario below keeps the supplied components, cost boundary and physical quantities explicit. Its dollar prices are illustrative, independent of the interactive example.

This independent 2-ply example has a 0.5-mil PET face at 1.39 g/cm³ and 1 PE layer at 1 mil and 0.92 g/cm³ each. Every interface adds 2 dry GSM of adhesive.

PET price
$2/lb
PE price
$1.25/lb
Wet adhesive
$2/lb · 40% solids
Total basis weight
43,02 g/m²
Coverage yield
113,49 ft²/lb
Material cost
US$0,01526/ft²
Layer GSM = mil × 25.4 × density; Yield(ft²/lb) = 4,882.427636 ÷ Total GSM

These are theoretical material figures. Converting loss, labor, energy and freight are excluded. Dry adhesive is retained mass; its purchased wet mass is divided by 0.40.

Preguntas frecuentes

Which units should I use for laminate cost per ft²?

Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.

Can I compare two laminate cost per ft² results directly?

Yes, when both runs use the same specification, purchasing boundary and included charges. Record the component structure and cost basis for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.

Comprueba la fórmula, las unidades y los supuestos mostrados antes de utilizar el resultado.

Método, unidades y supuestos del material ↗