HERRAMIENTA 64 / 136

Nested Trays per Carton Stack Calculator — US Units

Nested Trays per Carton Stack connects the figures on a US supplier quote with the quantity used by your packaging operation. Have internal carton height (inch), total vertical packing clearance (inch), first tray height (inch) ready before you start.

Tus especificaciones

unidades
Los resultados se actualizan al editar. No se guarda nada hasta que tú lo decidas.
Cálculo en tiempo real

Máximo de bandejas en una pila por caja

99,00 trays
Altura ocupada por la pila encajada32,83 inch
Altura sin usar tras la holgura de embalaje0,2362 inch
Cajas necesarias con una pila en cada una102,00 cajas

Supone una pila vertical por caja. La base de la bandeja debe caber en la longitud y anchura interiores de la caja por separado.

Use el incremento medido de altura de cada bandeja encajada. No se modelan deformación ni compresión.

Altura útil = Interior − Holgura vertical total; Bandejas/pila = redondeo inferior((Altura útil − Primera bandeja) ÷ Paso) + 1 si cabe la primera

Internal carton height: 33.46456692913386 inch; Total vertical packing clearance: 0.39370078740157477 inch; First tray height: 1.968503937007874 inch; Additional nesting pitch: 0.31496062992125984 inch; Trays to pack: 10000 units → 99,00 trays

Calculado con tus datos. Confirma las especificaciones con tu proveedor.

La fórmula, explicada.

Altura útil = Interior − Holgura vertical total; Bandejas/pila = redondeo inferior((Altura útil − Primera bandeja) ÷ Paso) + 1 si cabe la primera

The result answers a specific purchasing question: Work out nested trays per carton stack with US purchasing units. Enter the actual specification and compare the result on a consistent order basis. Read maximum trays in one carton stack in trays. Width and repeat measurements describe the actual purchased web or blank; a finished pack dimension is only interchangeable when the layout really uses that dimension. Keep input prices on the unit printed next to each price field. The US view converts the physical quantity and its price denominator together, so changing units preserves the calculated material or order value.

Cómo usar esta calculadora

  1. 01

    Collect Internal carton height (inch); Total vertical packing clearance (inch); First tray height (inch); Additional nesting pitch (inch); Trays to pack (units). Leave optional unknown values blank rather than substituting zero.

  2. 02

    Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.

  3. 03

    Review maximum trays in one carton stack and the secondary outputs. Check the quote boundary, then repeat with the competing specification or order quantity.

Un cálculo que puedes comprobar

For this US purchasing example, enter internal carton height 33.46 inch, total vertical packing clearance 0.3937 inch, first tray height 1.97 inch, additional nesting pitch 0.3150 inch. The calculated maximum trays in one carton stack is 99.00 trays. The table lists the remaining inputs and results so the scenario can be checked or reproduced.

Altura interior de la caja
33,4645669 inch
Holgura vertical total de embalaje
0,393700787 inch
Altura de la primera bandeja
1,96850394 inch
Paso adicional de anidamiento
0,31496063 inch
Bandejas para embalar
10.000 unidades
Usable height = Internal carton height − Total vertical clearance; Trays/stack = floor((Usable height − First tray height) ÷ Nesting pitch) + 1 when the first tray fits
Máximo de bandejas en una pila por caja99,00 trays

Preguntas frecuentes

Which units should I use for nested trays per carton stack?

Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.

Can I compare two nested trays per carton stack results directly?

Yes, when both runs use the same specification, purchasing boundary and included charges. Record internal carton height (inch), total vertical packing clearance (inch), first tray height (inch), additional nesting pitch (inch) for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.

Comprueba la fórmula, las unidades y los supuestos mostrados antes de utilizar el resultado.

Método, unidades y supuestos del material ↗