HERRAMIENTA 87 / 136

Shrink Sleeve Cost per Unit Calculator — US Units

Shrink Sleeve Cost per Unit connects the figures on a US supplier quote with the quantity used by your packaging operation. Have layflat width (inch), sleeve cut length (inch), film gsm (g/m²) ready before you start.

Tus especificaciones

g/m²
USD/lb
%
USD/unit

Solo etiqueta de unidad. Sin conversión de divisas.

Los resultados se actualizan al editar. No se guarda nada hasta que tú lo decidas.
Cálculo en tiempo real

Coste de película por manga conforme

US$0,00616/sleeve
Material de película por 1.000 mangas conformesUS$6,1579/1,000 sleeves
Incluida la transformación indicada por mangaUS$0,00616/sleeve
Superficie nominal del tubo abierto0,3229 ft²/sleeve
Masa nominal de película por manga0,004299 lb/sleeve
Película bruta asignada por manga conforme0,004525 lb/sleeve
Gramaje de película utilizado65,00 g/m²

El ancho plano es la mitad de la circunferencia del tubo abierto, por lo que la superficie incluye ambas caras. Solapes adicionales o recortes de borde quedan fuera de esta geometría nominal.

La merma es la fracción perdida de la entrada bruta. Necesidad bruta = producción conforme ÷ (1 − merma/100).

Los cargos de unión, impresión y transformación son independientes salvo que se introduzcan.

Sleeve ft² = 2 × Layflat width(in) × Cut length(in) ÷ 144; Cost/good sleeve = Sleeve ft² × Price/ft² ÷ (1 − Waste fraction)

Layflat width: 3.937007874015748 inch; Sleeve cut length: 5.905511811023622 inch; Film GSM: 65 g/m²; Film price on selected basis: 1.3607771100000001 USD/lb; Process loss on gross input: 5 %; Additional seaming / printing / conversion per sleeve: 0 USD/unit → US$0,00616/sleeve

Calculado con tus datos. Confirma las especificaciones con tu proveedor.

La fórmula, explicada.

Sleeve ft² = 2 × Layflat width(in) × Cut length(in) ÷ 144; Cost/good sleeve = Sleeve ft² × Price/ft² ÷ (1 − Waste fraction)

The result answers a specific purchasing question: Work out shrink sleeve cost per unit with US purchasing units. Enter the actual specification and compare the result on a consistent order basis. Read film material cost per good sleeve in your selected currency/sleeve. Width and repeat measurements describe the actual purchased web or blank; a finished pack dimension is only interchangeable when the layout really uses that dimension. Keep input prices on the unit printed next to each price field. The US view converts the physical quantity and its price denominator together, so changing units preserves the calculated material or order value.

Cómo usar esta calculadora

  1. 01

    Collect Layflat width (inch); Sleeve cut length (inch); Film GSM (g/m²); Film thickness (mil); Entered film density (g/cm³); Film price on selected basis (currency/lb); Process loss on gross input (%); Additional seaming / printing / conversion per sleeve (currency/unit). Leave optional unknown values blank rather than substituting zero.

  2. 02

    Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.

  3. 03

    Review film material cost per good sleeve and the secondary outputs. Check the quote boundary, then repeat with the competing specification or order quantity.

Un cálculo que puedes comprobar

For this US purchasing example, enter layflat width 3.94 inch, sleeve cut length 5.91 inch, film gsm 65.00 g/m², film price on selected basis US$1.3608/lb. The calculated film material cost per good sleeve is US$0.00616/sleeve. The table lists the remaining inputs and results so the scenario can be checked or reproduced.

Ancho del tubo aplanado
3,93700787 inch
Longitud de corte de manga
5,90551181 inch
Gramaje del film
65 g/m²
Precio del film en la base elegida
1,36077711 USD/lb
Pérdida sobre entrada bruta
5 %
Costura / impresión / transformación adicionales por manga
0 USD/unidad
Sleeve ft² = 2 × Layflat width(in) × Cut length(in) ÷ 144; Cost/good sleeve = Sleeve ft² × Price/ft² ÷ (1 − Waste fraction)
Coste de película por manga conformeUS$0,00616/sleeve

Preguntas frecuentes

Which units should I use for shrink sleeve cost per unit?

Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.

Can I compare two shrink sleeve cost per unit results directly?

Yes, when both runs use the same specification, purchasing boundary and included charges. Record layflat width (inch), sleeve cut length (inch), film gsm (g/m²), film thickness (mil) for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.

Comprueba la fórmula, las unidades y los supuestos mostrados antes de utilizar el resultado.

Método, unidades y supuestos del material ↗