Count labels from roll feet and complete inch pitch

Measure machine-direction pitch as label height plus gap. Use usable liner footage and the number of label positions across the web.

Publicado por Nalyquo · ·

Cálculos ilustrativos; no se afirma revisión independiente especializada. Esta actualización añade información de publicación y método.

Método y alcance de referenciasPolítica editorial y correcciones

Set up the US purchasing comparison

Measure machine-direction pitch as label height plus gap. Use usable liner footage and the number of label positions across the web.

Formula and worked US example

Labels = floor(Usable ft × 12 ÷ Pitch(in)) × Labels across

A 1,000-ft roll contains 12,000 inches. A 3.75-inch label with a 0.25-inch gap has a 4-inch pitch. At two across, nominal roll count is 6,000 labels.

Checks before using the estimate

Leaders, trailers, splices and missing labels can reduce accepted count. State which sections usable footage already excludes.

  • Use actual supplier prices in place of these independent illustrative dollar quotes. No exchange rate is implied.
  • Keep the same technical specification, accepted-output denominator and delivery boundary across alternatives.

Preguntas habituales

Can I reproduce the US figures in a calculator?

Open a related US calculator below and enter the stated quantities with their matching unit prices. Intermediate values in this article may be rounded.

What should I verify before using this result?

Leaders, trailers, splices and missing labels can reduce accepted count. State which sections usable footage already excludes.