Corrugated Sheet Weight Calculator — US Units
Corrugated Sheet Weight connects the figures on a US supplier quote with the quantity used by your packaging operation. Have sheet width (inch), sheet length (inch), actual board gsm (g/m²) ready before you start.
Vos spécifications
Poids par feuille
Utilisez le grammage réel du carton. Le type de cannelure, l’ECT et le BCT ne déterminent pas le grammage.
Sheet lb = Length(in) × Width(in) ÷ 144 × Board GSM × 0.0002048161436
Sheet width: 47.24409448818898 inch; Sheet length: 31.496062992125985 inch; Actual board GSM: 500 g/m²; Sheet quantity: 1000 units → 1,06 lb/sheetCalculé à partir de vos données. Confirmez les spécifications avec votre fournisseur.
La formule expliquée.
The result answers a specific purchasing question: Work out corrugated sheet weight with US purchasing units. Enter the actual specification and compare the result on a consistent order basis. Read weight per sheet in lb/sheet. Width and repeat measurements describe the actual purchased web or blank; a finished pack dimension is only interchangeable when the layout really uses that dimension. Keep input prices on the unit printed next to each price field. The US view converts the physical quantity and its price denominator together, so changing units preserves the calculated material or order value.
Comment utiliser ce calculateur
- 01
Collect Sheet width (inch); Sheet length (inch); Actual board GSM (g/m²); Sheet quantity (units). Leave optional unknown values blank rather than substituting zero.
- 02
Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.
- 03
Review weight per sheet and the secondary outputs. Check the quote boundary, then repeat with the competing specification or order quantity.
Un calcul que vous pouvez vérifier
For this US purchasing example, enter sheet width 47.24 inch, sheet length 31.50 inch, actual board gsm 500.00 g/m², sheet quantity 1,000.00 units. The calculated weight per sheet is 1.06 lb/sheet. The table lists the remaining inputs and results so the scenario can be checked or reproduced.
- Largeur de feuille
- 47,2440945 inch
- Longueur de feuille
- 31,496063 inch
- Grammage réel du carton
- 500 g/m²
- Nombre de feuilles
- 1 000 unités
Sheet lb = Length(in) × Width(in) ÷ 144 × Board GSM × 0.0002048161436Questions fréquentes
Which units should I use for corrugated sheet weight?
Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.
Can I compare two corrugated sheet weight results directly?
Yes, when both runs use the same specification, purchasing boundary and included charges. Record sheet width (inch), sheet length (inch), actual board gsm (g/m²), sheet quantity (units) for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.
Vérifiez la formule, les unités et les hypothèses affichées avant d’utiliser le résultat.
Méthode, unités et hypothèses sur les matériaux ↗