GSM to mils Calculator — US Units
GSM to mils connects the figures on a US supplier quote with the quantity used by your packaging operation. Have film gsm (g/m²), material density (g/cm³) ready before you start.
Vos spécifications
Utilisez le grammage réel du fournisseur ou une mesure, si disponible.
Masse volumique typique. La valeur réelle dépend du grade et de la formulation de la résine ; utilisez les données du fournisseur ou des mesures si disponibles.
Épaisseur estimée du film
Estimated using typical PET / BOPET density of 1.39 g/cm³. Actual density varies by resin grade and formulation.
Une seule masse volumique convient uniquement à une matière homogène ou à une valeur effective connue.
Thickness(mil) = GSM ÷ Density(g/cm³) ÷ 25.4
Film GSM: 16.68 g/m²; Material density: 1.39 g/cm³ → 0,4724 milCalculé à partir de vos données. Confirmez les spécifications avec votre fournisseur.
La formule expliquée.
The result answers a specific purchasing question: Work out gsm to mils with US purchasing units. Enter the actual specification and compare the result on a consistent order basis. Read estimated film thickness in mil. Width and repeat measurements describe the actual purchased web or blank; a finished pack dimension is only interchangeable when the layout really uses that dimension. Keep input prices on the unit printed next to each price field. The US view converts the physical quantity and its price denominator together, so changing units preserves the calculated material or order value.
Comment utiliser ce calculateur
- 01
Collect Film GSM (g/m²); Material density (g/cm³). Leave optional unknown values blank rather than substituting zero.
- 02
Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.
- 03
Review estimated film thickness and the secondary outputs. Check the quote boundary, then repeat with the competing specification or order quantity.
Un calcul que vous pouvez vérifier
For this US purchasing example, enter film gsm 16.68 g/m², material density 1.39 g/cm³. The calculated estimated film thickness is 0.4724 mil. The table lists the remaining inputs and results so the scenario can be checked or reproduced.
- Grammage du film
- 16,68 g/m²
- Masse volumique du matériau
- 1,39 g/cm³
Thickness(mil) = GSM ÷ Density(g/cm³) ÷ 25.4Questions fréquentes
Which units should I use for gsm to mils?
Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.
Can I compare two gsm to mils results directly?
Yes, when both runs use the same specification, purchasing boundary and included charges. Record film gsm (g/m²), material density (g/cm³) for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.
Vérifiez la formule, les unités et les hypothèses affichées avant d’utiliser le résultat.
Méthode, unités et hypothèses sur les matériaux ↗