3-Ply Laminate GSM Calculator — US Units
3-Ply Laminate GSM connects the figures on a US supplier quote with the quantity used by your packaging operation. Build the structure or component list from the supplied specification.
3 फिल्म। 2 चिपकने वाले इंटरफ़ेस।
यह सामान्य घनत्व है। वास्तविक घनत्व रेज़िन ग्रेड और मिश्रण के अनुसार बदलता है; उपलब्ध होने पर आपूर्तिकर्ता या मापे गए आँकड़े उपयोग करें। मापा या आपूर्तिकर्ता का जीएसएम सामान्यतः घनत्व से निकले अनुमान से अधिक विश्वसनीय है। कस्टम सामग्री के लिए सत्यापित घनत्व दर्ज करें। सामान्य घनत्व से कागज़ का जीएसएम न निकालें।
चिपकाने वाला पदार्थ, छपाई और कोटिंग
शामिल न की जाने वाली अतिरिक्त सामग्री के लिए शून्य दर्ज करें। सभी जीएसएम प्रति वर्ग मीटर शेष सूखा द्रव्यमान हैं। चिपकाने वाले पदार्थ, स्याही और कोटिंग की मोटाई जीएसएम से नहीं निकाली जाती।
शेष सूखी कोटिंग का भार
शेष सूखी कोटिंग का भार
शेष सूखा द्रव्यमान
शेष सूखा द्रव्यमान
शेष सूखा द्रव्यमान
- फिल्म परतें
- 96.18 g/m²
- चिपकाने वाला पदार्थ, स्याही, कोटिंग और अन्य
- 4.00 g/m²
- लैमिनेट की उपज
- 48.74 ft²/lb
- केवल फिल्म की मोटाई
- 3.19 mil
- प्रति 1,000 वर्ग मीटर वज़न
- 220.86 lb
| परत / अतिरिक्त सामग्री | सूखा जीएसएम |
|---|---|
| 1. PET / BOPET | 16.68 |
| 2. एल्युमिनियम फ़ॉइल | 24.30 |
| 3. PE (सामान्य) | 55.20 |
| Adhesive interface 1 | 2.00 |
| Adhesive interface 2 | 2.00 |
| स्याही · शामिल नहीं | 0.00 |
| कोटिंग · शामिल नहीं | 0.00 |
| अन्य शेष सामग्री · शामिल नहीं | 0.00 |
| कुल | 100.18 |
फिल्म की मोटाई में चिपकाने वाला पदार्थ, स्याही और कोटिंग नहीं हैं। उपज प्रक्रिया अपव्यय से पहले की सैद्धांतिक है। इस अनुमान में लाइब्रेरी के सामान्य घनत्व शामिल हैं।
सूत्र और रखे गए मान
Layer GSM = Thickness(mil) × 25.4 × Density(g/cm³). Total GSM includes dry retained additions.
Yield(ft²/lb) = 4,882.427636 ÷ Total GSM. Material $/ft² = GSM × 0.0002048161436 × Material $/lb.
PET / BOPET: 0.4724 mil × 25.4 × 1.39 = 16.68 g/m²
एल्युमिनियम फ़ॉइल: 0.3543 mil × 25.4 × 2.70 = 24.30 g/m²
PE (सामान्य): 2.36 mil × 25.4 × 0.9200 = 55.20 g/m²
Total retained basis weight: 100.18 g/m²
Yield: 4,882.427636 ÷ 100.18 = 48.74 ft²/lb
सूत्र का स्पष्ट विवरण।
Build 3-ply laminate gsm from the actual layer or component records rather than a generic material assumption. Enter dimensional specifications in the displayed US units and keep every price paired with its stated denominator. Review the layer contributions and the finished result together before comparing suppliers.
इस कैलकुलेटर का उपयोग कैसे करें
- 01
Choose the actual materials or components and record their quantities, prices and retained additions.
- 02
Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.
- 03
Review each contribution, then compare the total at the same production quantity and cost boundary.
ऐसी गणना जिसे आप जाँच सकते हैं
The worked US scenario below keeps the supplied components, cost boundary and physical quantities explicit. Its dollar prices are illustrative, independent of the interactive example.
This independent 3-ply example has a 0.5-mil PET face at 1.39 g/cm³ and 2 PE layers at 1 mil and 0.92 g/cm³ each. Every interface adds 2 dry GSM of adhesive.
- PET price
- $2/lb
- PE price
- $1.25/lb
- Wet adhesive
- $2/lb · 40% solids
- Total basis weight
- 68.39 g/m²
- Coverage yield
- 71.39 ft²/lb
- Material cost
- US$0.02329/ft²
Layer GSM = mil × 25.4 × density; Yield(ft²/lb) = 4,882.427636 ÷ Total GSMThese are theoretical material figures. Converting loss, labor, energy and freight are excluded. Dry adhesive is retained mass; its purchased wet mass is divided by 0.40.
अक्सर पूछे जाने वाले प्रश्न
Which units should I use for 3-ply laminate gsm?
Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.
Can I compare two 3-ply laminate gsm results directly?
Yes, when both runs use the same specification, purchasing boundary and included charges. Record the component structure and cost basis for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.
परिणाम का उपयोग करने से पहले दिखाई गई गणना का सूत्र, इकाइयाँ और मान्यताएँ जाँचें।
विधि, इकाइयाँ और सामग्री की मान्यताएँ ↗