Core Weight Calculator — US Units
Core Weight connects the figures on a US supplier quote with the quantity used by your packaging operation. Have core outside diameter (inch), core inside diameter (inch), core width (inch) ready before you start.
आपके विनिर्देश
700 किग्रा/मी³ पेपरबोर्ड का उदाहरण अनुमान है। कोर का वास्तविक घनत्व दर्ज करें; यह सार्वभौमिक मान नहीं है।
कोर का अनुमानित वज़न
डिफ़ॉल्ट घनत्व पेपरबोर्ड का उदाहरण अनुमान है, सार्वभौमिक विनिर्देश नहीं। वास्तविक घनत्व दर्ज करें या कोर का मापा वज़न उपयोग करें।
एकसमान खोखला बेलन माना गया है; प्लग और सिरे के फिटिंग शामिल नहीं हैं।
Core lb = π ÷ 4 × ((OD(in) ÷ 12)² − (ID(in) ÷ 12)²) × Core length(in) ÷ 12 × Density(lb/ft³)
Core outside diameter: 3.543307086614173 inch; Core inside diameter: 2.9921259842519685 inch; Core width: 31.496062992125985 inch; Core material density: 43.699572403301225 lb/ft³ → 2.25 lbआपके इनपुट से गणना की गई है। आपूर्तिकर्ता से विनिर्देशों की पुष्टि करें।
सूत्र का स्पष्ट विवरण।
The result answers a specific purchasing question: Work out core weight with US purchasing units. Enter the actual specification and compare the result on a consistent order basis. Read estimated core weight in lb. Width and repeat measurements describe the actual purchased web or blank; a finished pack dimension is only interchangeable when the layout really uses that dimension. Keep input prices on the unit printed next to each price field. The US view converts the physical quantity and its price denominator together, so changing units preserves the calculated material or order value.
इस कैलकुलेटर का उपयोग कैसे करें
- 01
Collect Core outside diameter (inch); Core inside diameter (inch); Core width (inch); Core material density (lb/ft³). Leave optional unknown values blank rather than substituting zero.
- 02
Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.
- 03
Review estimated core weight and the secondary outputs. Check the quote boundary, then repeat with the competing specification or order quantity.
ऐसी गणना जिसे आप जाँच सकते हैं
For this US purchasing example, enter core outside diameter 3.54 inch, core inside diameter 2.99 inch, core width 31.50 inch, core material density 43.70 lb/ft³. The calculated estimated core weight is 2.25 lb. The table lists the remaining inputs and results so the scenario can be checked or reproduced.
- कोर का बाहरी व्यास
- 3.54330709 inch
- कोर का भीतरी व्यास
- 2.99212598 inch
- कोर की चौड़ाई
- 31.496063 inch
- कोर सामग्री का घनत्व
- 43.6995724 lb/ft³
Core lb = π ÷ 4 × ((OD(in) ÷ 12)² − (ID(in) ÷ 12)²) × Core length(in) ÷ 12 × Density(lb/ft³)अक्सर पूछे जाने वाले प्रश्न
Which units should I use for core weight?
Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.
Can I compare two core weight results directly?
Yes, when both runs use the same specification, purchasing boundary and included charges. Record core outside diameter (inch), core inside diameter (inch), core width (inch), core material density (lb/ft³) for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.
परिणाम का उपयोग करने से पहले दिखाई गई गणना का सूत्र, इकाइयाँ और मान्यताएँ जाँचें।
विधि, इकाइयाँ और सामग्री की मान्यताएँ ↗