टूल 11 / 136

Flexible Packaging Quote Comparison Calculator — US Units

Flexible Packaging Quote Comparison connects the figures on a US supplier quote with the quantity used by your packaging operation. Build the structure or component list from the supplied specification.

कोटेशन को समान आधार पर लाएँ।

उपलब्ध हो तो आपूर्तिकर्ता का वास्तविक जीएसएम दर्ज करें। अज्ञात माप खाली छोड़ें; तुलना बताएगी किस रूपांतरण में और जानकारी चाहिए।

QUOTATION A
ज्यामिति और विनिर्देश
ऑर्डर और अतिरिक्त लागत
QUOTATION B
ज्यामिति और विनिर्देश
ऑर्डर और अतिरिक्त लागत

माँग और विनिर्देश सहनशीलताएँ

वार्षिक खर्च साझा माँग पूरी करने लायक पूरी खेप खरीदता है। भाड़ा हर खेप पर और टूलिंग पहले वर्ष एक बार है। अतिरिक्त स्टॉक शामिल है। न्यूनतम ऑर्डर एक सीमा है, मानी गई खेप मात्रा नहीं। प्रक्रिया अपव्यय, सीमा शुल्क, कर, भुगतान शर्तें और स्टॉक रखने की लागत शामिल नहीं हैं।

विनिर्देश सहनशीलताएँ बदलें

निरपेक्ष सहनशीलताएँ सबसे बड़े और छोटे दर्ज मान की तुलना करती हैं। लेन बिल्कुल समान हों। संरचना जाँच केवल अक्षर केस और दोहराए खाली स्थान अनदेखे करती है; सामग्री की समतुल्यता नहीं समझती।

सबसे कम गणना लागत ≠ समतुल्य विनिर्देश

दर्ज फ़ील्ड आपकी सहनशीलताओं में मेल खाते हैं। इससे समतुल्यता सिद्ध नहीं होती; अवरोध, सीलिंग, यांत्रिक गुण और स्वीकृतियाँ अभी जाँचनी हैं।

आपूर्तिकर्ता अनुसार सामग्री और पहली खेप की पहुँच लागत। उभरे मान उस पंक्ति की सबसे कम गणना लागत हैं।
तुलना का आधारSupplier AUSDSupplier BUSD
कोटेशन का आधारlbft²
कोटेशन की कीमतUS$1.4515/lbUS$0.02127/ft²
संरचनाPET12 / PE60 + चिपकाने वाला पदार्थ 2 ग्राम/वर्ग मीटरPET12 / PE60 + चिपकाने वाला पदार्थ 2 ग्राम/वर्ग मीटर
GSM73.88 g/m²73.88 g/m²
कुल मोटाई2.83 mil2.83 mil
वेब की चौड़ाई31.50 inch31.50 inch
रिपीट / लेन9.84 inch / 29.84 inch / 2
न्यूनतम ऑर्डर मात्रा1,102.31 lb1,102.31 lb
प्रति खेप मात्रा2,204.62 lb2,204.62 lb
भाड़ा / खेपUS$250.00US$350.00
एकमुश्त टूलिंग लागतUS$600.00US$900.00
Material cost / lbUS$1.4515/lbUS$1.4060/lbसबसे कम गणना लागत
Material cost / ft²US$0.02196/ft²US$0.02127/ft²सबसे कम गणना लागत
Material cost / linear footUS$0.05765/ftUS$0.05584/ftसबसे कम गणना लागत
सामग्री लागत / 1,000 इकाइयाँUS$23.64US$22.90सबसे कम गणना लागत
First-shipment landed / lbUS$1.8370/lbसबसे कम गणना लागतUS$1.9730/lb
First-shipment landed / ft²US$0.02780/ft²सबसे कम गणना लागतUS$0.02985/ft²
खेप सामग्री का उप-योगUS$3,200.00US$3,099.62
पहली खेप की कुल पहुँच लागतUS$4,050.00US$4,349.62
पहले वर्ष का वार्षिक खर्चUS$28,200.00US$28,496.97
प्रतिवर्ष पूरी खेप88
Annual purchased 1,000 units1,082.841,082.84

पहली खेप की पहुँच लागत में सारी दर्ज टूलिंग है, वार्षिक खर्च में एक बार। 1,000 इकाइयों के मूल्य दर्ज रिपीट और लेन की नाममात्र इकाइयाँ हैं, अपव्यय भत्ता नहीं। कम लागत अकेले आपूर्तिकर्ता उपयुक्तता सिद्ध नहीं करती।

सूत्र और रखे गए मान

Price/ft² = Price/lb × GSM × 0.0002048161436; Price/ft = Price/ft² × Width(in) ÷ 12; Price/1,000 packs = Price/ft × Repeat(in) ÷ 12 × 1,000 ÷ Lanes

Supplier A

Area price: US$0.02196/ft²

Weight price: US$1.4515/lb

Running-foot price: US$0.05765/ft

Width: 31.50 inch; Repeat: 9.84 inch

Supplier B

Area price: US$0.02127/ft²

Weight price: US$1.4060/lb

Running-foot price: US$0.05584/ft

Width: 31.50 inch; Repeat: 9.84 inch

सूत्र का स्पष्ट विवरण।

Price/ft² = Price/lb × GSM × 0.0002048161436; Price/ft = Price/ft² × Width(in) ÷ 12; Price/1,000 packs = Price/ft × Repeat(in) ÷ 12 × 1,000 ÷ Lanes

Build flexible packaging quote comparison from the actual layer or component records rather than a generic material assumption. Enter dimensional specifications in the displayed US units and keep every price paired with its stated denominator. Review the layer contributions and the finished result together before comparing suppliers.

इस कैलकुलेटर का उपयोग कैसे करें

  1. 01

    Choose the actual materials or components and record their quantities, prices and retained additions.

  2. 02

    Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.

  3. 03

    Review each contribution, then compare the total at the same production quantity and cost boundary.

ऐसी गणना जिसे आप जाँच सकते हैं

The worked US scenario below keeps the supplied components, cost boundary and physical quantities explicit. Its dollar prices are illustrative, independent of the interactive example.

Supplier A offers 25,000 ft² at $0.015/ft² with $80 freight. Supplier B offers the same qualified coverage at $0.0145/ft² with $100 freight.

Supplier A delivered
US$455.00
Supplier B delivered
US$462.50
A: 25,000 × $0.015 + $80 = $455; B: 25,000 × $0.0145 + $100 = $462.50
Difference for this purchaseUS$7.5000

Both suppliers must meet the same specification. No currency conversion, tax treatment or supplier qualification is implied.

अक्सर पूछे जाने वाले प्रश्न

Which units should I use for flexible packaging quote comparison?

Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.

Can I compare two flexible packaging quote comparison results directly?

Yes, when both runs use the same specification, purchasing boundary and included charges. Record the component structure and cost basis for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.

परिणाम का उपयोग करने से पहले दिखाई गई गणना का सूत्र, इकाइयाँ और मान्यताएँ जाँचें।

विधि, इकाइयाँ और सामग्री की मान्यताएँ ↗