टूल 136 / 136

Packaging Reorder Point Calculator — US Units

Packaging Reorder Point connects the figures on a US supplier quote with the quantity used by your packaging operation. Have average usage per day (units/day), supplier lead time (days), chosen safety stock (units) ready before you start.

आपके विनिर्देश

units/day
दिन
इकाइयाँ
इनपुट बदलते ही परिणाम अपडेट होते हैं। आपके सहेजने का विकल्प चुनने तक कुछ भी सहेजा नहीं जाता।
तत्काल गणना

पुनः ऑर्डर का स्टॉक स्तर

20,000.00 इकाइयाँ
लीड टाइम के दौरान अपेक्षित माँग15,000.00 इकाइयाँ

दैनिक खपत और लीड टाइम का आधार समान कार्यदिवस या कैलेंडर दिन हो।

सुरक्षा स्टॉक दर्ज होता है, सेवा स्तर या माँग वितरण से नहीं निकाला जाता।

ऑर्डर मात्रा, EOQ, आपूर्तिकर्ता विश्वसनीयता या गारंटीकृत स्टॉक खत्म होने की संभावना नहीं निकालता।

पुनःऑर्डर बिंदु = ceil(दैनिक उपयोग × लीड टाइम + सुरक्षा स्टॉक)

Average usage per day: 1000 units/day; Supplier lead time: 15 days; Chosen safety stock: 5000 units → 20,000.00 इकाइयाँ

आपके इनपुट से गणना की गई है। आपूर्तिकर्ता से विनिर्देशों की पुष्टि करें।

सूत्र का स्पष्ट विवरण।

पुनःऑर्डर बिंदु = ceil(दैनिक उपयोग × लीड टाइम + सुरक्षा स्टॉक)

The result answers a specific purchasing question: Work out packaging reorder point with US purchasing units. Enter the actual specification and compare the result on a consistent order basis. Read reorder inventory position in units. Width and repeat measurements describe the actual purchased web or blank; a finished pack dimension is only interchangeable when the layout really uses that dimension. Keep input prices on the unit printed next to each price field. The US view converts the physical quantity and its price denominator together, so changing units preserves the calculated material or order value.

इस कैलकुलेटर का उपयोग कैसे करें

  1. 01

    Collect Average usage per day (units/day); Supplier lead time (days); Chosen safety stock (units). Leave optional unknown values blank rather than substituting zero.

  2. 02

    Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.

  3. 03

    Review reorder inventory position and the secondary outputs. Check the quote boundary, then repeat with the competing specification or order quantity.

ऐसी गणना जिसे आप जाँच सकते हैं

For this US purchasing example, enter average usage per day 1,000.00 units/day, supplier lead time 15.00 days, chosen safety stock 5,000.00 units. The calculated reorder inventory position is 20,000.00 units. The table lists the remaining inputs and results so the scenario can be checked or reproduced.

प्रतिदिन औसत खपत
1,000 इकाइयाँ/day
आपूर्तिकर्ता की लीड टाइम
15 दिन
चुना हुआ सुरक्षा स्टॉक
5,000 इकाइयाँ
Reorder point = ceil(Daily usage × Lead time + Safety stock)
पुनः ऑर्डर का स्टॉक स्तर20,000.00 इकाइयाँ

अक्सर पूछे जाने वाले प्रश्न

Which units should I use for packaging reorder point?

Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.

Can I compare two packaging reorder point results directly?

Yes, when both runs use the same specification, purchasing boundary and included charges. Record average usage per day (units/day), supplier lead time (days), chosen safety stock (units) for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.

परिणाम का उपयोग करने से पहले दिखाई गई गणना का सूत्र, इकाइयाँ और मान्यताएँ जाँचें।

विधि, इकाइयाँ और सामग्री की मान्यताएँ ↗