टूल 38 / 136

Roll Diameter from Weight Calculator — US Units

Roll Diameter from Weight connects the figures on a US supplier quote with the quantity used by your packaging operation. Have net film weight (lb), web width (inch), film gsm (g/m²) ready before you start.

आपके विनिर्देश

g/m²

उपलब्ध होने पर आपूर्तिकर्ता का वास्तविक या मापा गया ग्राम प्रति वर्ग मीटर भार उपयोग करें।

कोर का बाहरी व्यास मापें, भीतरी छेद नहीं।

इनपुट बदलते ही परिणाम अपडेट होते हैं। आपके सहेजने का विकल्प चुनने तक कुछ भी सहेजा नहीं जाता।
तत्काल गणना

रोल का अनुमानित बाहरी व्यास

14.49 inch
गणना की गई रनिंग लंबाई4,101.05 ft

यह ज्यामितीय अनुमान समान मोटाई, कसकर लिपटे रोल और भीतर हवा न होने पर आधारित है। वास्तविक रनिंग लंबाई अलग हो सकती है।

कोर का बाहरी व्यास उपयोग होता है; नाममात्र भीतरी व्यास उसका विकल्प नहीं है।

Length(ft) = Net lb ÷ (Width(in) ÷ 12 × GSM × 0.0002048161436); OD(in) = √(Core(in)² + 48 × Thickness(mil) ÷ 1,000 × Length(ft) ÷ π)

Net film weight: 176.36980974790205 lb; Web width: 31.496062992125985 inch; Film GSM: 80 g/m²; Film thickness: 3.149606299212598 mil; Core OUTER diameter: 3.543307086614173 inch → 14.49 inch

आपके इनपुट से गणना की गई है। आपूर्तिकर्ता से विनिर्देशों की पुष्टि करें।

सूत्र का स्पष्ट विवरण।

Length(ft) = Net lb ÷ (Width(in) ÷ 12 × GSM × 0.0002048161436); OD(in) = √(Core(in)² + 48 × Thickness(mil) ÷ 1,000 × Length(ft) ÷ π)

The result answers a specific purchasing question: Work out roll diameter from weight with US purchasing units. Enter the actual specification and compare the result on a consistent order basis. Read estimated roll outer diameter in inch. Width and repeat measurements describe the actual purchased web or blank; a finished pack dimension is only interchangeable when the layout really uses that dimension. Keep input prices on the unit printed next to each price field. The US view converts the physical quantity and its price denominator together, so changing units preserves the calculated material or order value.

इस कैलकुलेटर का उपयोग कैसे करें

  1. 01

    Collect Net film weight (lb); Web width (inch); Film GSM (g/m²); Film thickness (mil); Core OUTER diameter (inch). Leave optional unknown values blank rather than substituting zero.

  2. 02

    Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.

  3. 03

    Review estimated roll outer diameter and the secondary outputs. Check the quote boundary, then repeat with the competing specification or order quantity.

ऐसी गणना जिसे आप जाँच सकते हैं

For this US purchasing example, enter net film weight 176.37 lb, web width 31.50 inch, film gsm 80.00 g/m², film thickness 3.15 mil. The calculated estimated roll outer diameter is 14.49 inch. The table lists the remaining inputs and results so the scenario can be checked or reproduced.

फ़िल्म का शुद्ध भार
176.36981 lb
वेब की चौड़ाई
31.496063 inch
फ़िल्म का ग्राम प्रति वर्ग मीटर भार
80 g/m²
फ़िल्म की मोटाई
3.1496063 मिल
कोर का बाहरी व्यास
3.54330709 inch
Length(ft) = Net lb ÷ (Width(in) ÷ 12 × GSM × 0.0002048161436); OD(in) = √(Core(in)² + 48 × Thickness(mil) ÷ 1,000 × Length(ft) ÷ π)
रोल का अनुमानित बाहरी व्यास14.49 inch

अक्सर पूछे जाने वाले प्रश्न

Which units should I use for roll diameter from weight?

Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.

Can I compare two roll diameter from weight results directly?

Yes, when both runs use the same specification, purchasing boundary and included charges. Record net film weight (lb), web width (inch), film gsm (g/m²), film thickness (mil) for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.

परिणाम का उपयोग करने से पहले दिखाई गई गणना का सूत्र, इकाइयाँ और मान्यताएँ जाँचें।

विधि, इकाइयाँ और सामग्री की मान्यताएँ ↗