Shrink Sleeve Cost per Unit Calculator — US Units
Shrink Sleeve Cost per Unit connects the figures on a US supplier quote with the quantity used by your packaging operation. Have layflat width (inch), sleeve cut length (inch), film gsm (g/m²) ready before you start.
आपके विनिर्देश
केवल इकाई का नाम। मुद्रा रूपांतरण नहीं।
प्रति स्वीकृत स्लीव फिल्म सामग्री लागत
फ्लैट चौड़ाई खुले ट्यूब की परिधि की आधी है, इसलिए क्षेत्रफल में दोनों तरफ शामिल हैं। अतिरिक्त सीम ओवरलैप या किनारे की कटाई इस नाममात्र ज्यामिति के बाहर है।
अपव्यय सकल इनपुट का खोया अंश है। सकल आवश्यकता = स्वीकृत उत्पादन ÷ (1 − अपव्यय/100)।
सीम, छपाई और रूपांतरण शुल्क अलग हैं, जब तक दर्ज न किए जाएँ।
Sleeve ft² = 2 × Layflat width(in) × Cut length(in) ÷ 144; Cost/good sleeve = Sleeve ft² × Price/ft² ÷ (1 − Waste fraction)
Layflat width: 3.937007874015748 inch; Sleeve cut length: 5.905511811023622 inch; Film GSM: 65 g/m²; Film price on selected basis: 1.3607771100000001 USD/lb; Process loss on gross input: 5 %; Additional seaming / printing / conversion per sleeve: 0 USD/unit → US$0.00616/sleeveआपके इनपुट से गणना की गई है। आपूर्तिकर्ता से विनिर्देशों की पुष्टि करें।
सूत्र का स्पष्ट विवरण।
The result answers a specific purchasing question: Work out shrink sleeve cost per unit with US purchasing units. Enter the actual specification and compare the result on a consistent order basis. Read film material cost per good sleeve in your selected currency/sleeve. Width and repeat measurements describe the actual purchased web or blank; a finished pack dimension is only interchangeable when the layout really uses that dimension. Keep input prices on the unit printed next to each price field. The US view converts the physical quantity and its price denominator together, so changing units preserves the calculated material or order value.
इस कैलकुलेटर का उपयोग कैसे करें
- 01
Collect Layflat width (inch); Sleeve cut length (inch); Film GSM (g/m²); Film thickness (mil); Entered film density (g/cm³); Film price on selected basis (currency/lb); Process loss on gross input (%); Additional seaming / printing / conversion per sleeve (currency/unit). Leave optional unknown values blank rather than substituting zero.
- 02
Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.
- 03
Review film material cost per good sleeve and the secondary outputs. Check the quote boundary, then repeat with the competing specification or order quantity.
ऐसी गणना जिसे आप जाँच सकते हैं
For this US purchasing example, enter layflat width 3.94 inch, sleeve cut length 5.91 inch, film gsm 65.00 g/m², film price on selected basis US$1.3608/lb. The calculated film material cost per good sleeve is US$0.00616/sleeve. The table lists the remaining inputs and results so the scenario can be checked or reproduced.
- चपटी ट्यूब की चौड़ाई
- 3.93700787 inch
- स्लीव कट लंबाई
- 5.90551181 inch
- फ़िल्म का ग्राम प्रति वर्ग मीटर भार
- 65 g/m²
- चुने हुए आधार पर फ़िल्म की कीमत
- 1.36077711 USD/lb
- सकल इनपुट पर प्रक्रिया हानि
- 5 %
- प्रति स्लीव अतिरिक्त सीमिंग / प्रिंटिंग / रूपांतरण
- 0 USD/इकाई
Sleeve ft² = 2 × Layflat width(in) × Cut length(in) ÷ 144; Cost/good sleeve = Sleeve ft² × Price/ft² ÷ (1 − Waste fraction)अक्सर पूछे जाने वाले प्रश्न
Which units should I use for shrink sleeve cost per unit?
Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.
Can I compare two shrink sleeve cost per unit results directly?
Yes, when both runs use the same specification, purchasing boundary and included charges. Record layflat width (inch), sleeve cut length (inch), film gsm (g/m²), film thickness (mil) for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.
परिणाम का उपयोग करने से पहले दिखाई गई गणना का सूत्र, इकाइयाँ और मान्यताएँ जाँचें।
विधि, इकाइयाँ और सामग्री की मान्यताएँ ↗