Set up the US purchasing comparison
For each homogeneous layer, multiply thickness in mils by 25.4 and its stated density in g/cm³. Add separately confirmed dry adhesive, ink and coating GSM.
Formula and worked US example
Total GSM = Σ(Mil thickness × 25.4 × Density(g/cm³)) + Dry additions
A 0.5-mil layer at 1.39 g/cm³ contributes 17.653 GSM. A 2-mil layer at 0.92 g/cm³ contributes 46.736 GSM. Adding 2 dry GSM of adhesive gives 66.389 GSM total and about 73.54 ft²/lb of coverage yield.
Checks before using the estimate
Prefer representative measured complete-laminate GSM when available. Wet adhesive delivery mass is not retained dry coating mass.
- Use actual supplier prices in place of these independent illustrative dollar quotes. No exchange rate is implied.
- Keep the same technical specification, accepted-output denominator and delivery boundary across alternatives.
सामान्य प्रश्न
Can I reproduce the US figures in a calculator?
Open a related US calculator below and enter the stated quantities with their matching unit prices. Intermediate values in this article may be rounded.
What should I verify before using this result?
Prefer representative measured complete-laminate GSM when available. Wet adhesive delivery mass is not retained dry coating mass.