Count packs from roll feet, inch repeat and lanes

Measure the complete machine-direction repeat, including registration or gap where required. Count the finished pack positions across the actual web.

प्रकाशक Nalyquo · ·

उदाहरण गणनाएँ; स्वतंत्र विशेषज्ञ समीक्षा का दावा नहीं। यह अपडेट प्रकाशन और पद्धति जानकारी जोड़ता है।

पद्धति और संदर्भ दायरासंपादकीय नीति और सुधार

Set up the US purchasing comparison

Measure the complete machine-direction repeat, including registration or gap where required. Count the finished pack positions across the actual web.

Formula and worked US example

Good packs = Roll ft × 12 ÷ Repeat(in) × Lanes × Retained fraction

A 5,000-ft usable roll with a 10-inch repeat and two lanes provides 12,000 nominal pack positions. With 4% loss on that input, expected accepted output is 11,520 packs.

Checks before using the estimate

Use usable footage after separately excluded leaders and tails. A finished pack height is not automatically the machine repeat.

  • Use actual supplier prices in place of these independent illustrative dollar quotes. No exchange rate is implied.
  • Keep the same technical specification, accepted-output denominator and delivery boundary across alternatives.

सामान्य प्रश्न

Can I reproduce the US figures in a calculator?

Open a related US calculator below and enter the stated quantities with their matching unit prices. Intermediate values in this article may be rounded.

What should I verify before using this result?

Use usable footage after separately excluded leaders and tails. A finished pack height is not automatically the machine repeat.