STRUMENTO 67 / 136

Corrugated Box Weight Calculator — US Units

Corrugated Box Weight connects the figures on a US supplier quote with the quantity used by your packaging operation. Have actual blank width (inch), actual blank length (inch), actual board gsm (g/m²) ready before you start.

Le tue specifiche

g/m²
%
I risultati si aggiornano mentre modifichi i dati. Nulla viene salvato finché non lo scegli.
Calcolo in tempo reale

Peso stimato del cartone della scatola

0,2205 lb/box
Area effettiva della fustella rettangolare2,15 ft²
Massa della fustella prima dei ritagli0,2205 lb
Materiale rimosso con i ritagli indicati0,00 lb

Usa le dimensioni effettive della fustella. Le dimensioni interne o esterne della confezione finita non definiscono uno sviluppo esatto di fustellatura.

La percentuale di ritaglio descrive il materiale rimosso da questa fustella, non la perdita di resa produttiva. Adesivi, inchiostro e accessori sono esclusi salvo inclusione nella grammatura misurata.

Retained board lb = Blank length(in) × Blank width(in) ÷ 144 × Board GSM × 0.0002048161436 × (1 − Removal fraction)

Actual blank width: 19.68503937007874 inch; Actual blank length: 15.748031496062993 inch; Actual board GSM: 500 g/m²; Blank material removed by cutouts: 0 % → 0,2205 lb/box

Calcolato dai tuoi dati. Conferma le specifiche con il fornitore.

La formula spiegata.

Retained board lb = Blank length(in) × Blank width(in) ÷ 144 × Board GSM × 0.0002048161436 × (1 − Removal fraction)

The result answers a specific purchasing question: Work out corrugated box weight with US purchasing units. Enter the actual specification and compare the result on a consistent order basis. Read estimated box board weight in lb/box. Width and repeat measurements describe the actual purchased web or blank; a finished pack dimension is only interchangeable when the layout really uses that dimension. Keep input prices on the unit printed next to each price field. The US view converts the physical quantity and its price denominator together, so changing units preserves the calculated material or order value.

Come usare questo calcolatore

  1. 01

    Collect Actual blank width (inch); Actual blank length (inch); Actual board GSM (g/m²); Blank material removed by cutouts (%). Leave optional unknown values blank rather than substituting zero.

  2. 02

    Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.

  3. 03

    Review estimated box board weight and the secondary outputs. Check the quote boundary, then repeat with the competing specification or order quantity.

Un calcolo che puoi verificare

For this US purchasing example, enter actual blank width 19.69 inch, actual blank length 15.75 inch, actual board gsm 500.00 g/m², blank material removed by cutouts 0.00 %. The calculated estimated box board weight is 0.2205 lb/box. The table lists the remaining inputs and results so the scenario can be checked or reproduced.

Larghezza effettiva del fustellato
19,6850394 inch
Lunghezza effettiva del fustellato
15,7480315 inch
Grammatura effettiva del cartone
500 g/m²
Materiale del fustellato rimosso dai ritagli
0 %
Retained board lb = Blank length(in) × Blank width(in) ÷ 144 × Board GSM × 0.0002048161436 × (1 − Removal fraction)
Peso stimato del cartone della scatola0,2205 lb/box

Domande frequenti

Which units should I use for corrugated box weight?

Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.

Can I compare two corrugated box weight results directly?

Yes, when both runs use the same specification, purchasing boundary and included charges. Record actual blank width (inch), actual blank length (inch), actual board gsm (g/m²), blank material removed by cutouts (%) for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.

Verifica la formula, le unità e le ipotesi visualizzate prima di utilizzare il risultato.

Metodo, unità e ipotesi sui materiali ↗