STRUMENTO 78 / 136

Folding Carton Board Requirement Calculator — US Units

Folding Carton Board Requirement connects the figures on a US supplier quote with the quantity used by your packaging operation. Have good cartons required (units), actual blank width (inch), actual blank length (inch) ready before you start.

Le tue specifiche

unità
g/m²
%
I risultati si aggiornano mentre modifichi i dati. Nulla viene salvato finché non lo scegli.
Calcolo in tempo reale

Area lorda delle fustelle necessaria

22.660,86 ft²
Materiale lordo delle fustelle necessario1392,39 lb

Usa le dimensioni effettive della fustella. Le dimensioni interne o esterne della confezione finita non definiscono uno sviluppo esatto di fustellatura.

Lo scarto è la frazione persa dell’input lordo. Fabbisogno lordo = output conforme ÷ (1 − scarto/100).

L’acquisto facoltativo in fogli aggiunge gli sfridi rettangolari al fabbisogno lordo di fustelle.

Confronta solo due orientamenti rettangolari uniformi. Esclude interspazi, margini pinza, vincoli del senso fibra e incastri irregolari di fustelle.

Gross ft² = Good carton target × Blank ft² ÷ (1 − Waste fraction); Board lb = Gross ft² × GSM × 0.0002048161436

Good cartons required: 10000 units; Actual blank width: 19.68503937007874 inch; Actual blank length: 15.748031496062993 inch; Board GSM: 300 g/m²; Process loss on gross input: 5 %; Sheet width (optional): inch; Sheet length (optional): inch → 22.660,86 ft²

Calcolato dai tuoi dati. Conferma le specifiche con il fornitore.

La formula spiegata.

Gross ft² = Good carton target × Blank ft² ÷ (1 − Waste fraction); Board lb = Gross ft² × GSM × 0.0002048161436

The result answers a specific purchasing question: Work out folding carton board requirement with US purchasing units. Enter the actual specification and compare the result on a consistent order basis. Read gross blank area required in ft². Width and repeat measurements describe the actual purchased web or blank; a finished pack dimension is only interchangeable when the layout really uses that dimension. Keep input prices on the unit printed next to each price field. The US view converts the physical quantity and its price denominator together, so changing units preserves the calculated material or order value.

Come usare questo calcolatore

  1. 01

    Collect Good cartons required (units); Actual blank width (inch); Actual blank length (inch); Board GSM (g/m²); Process loss on gross input (%); Sheet width (optional) (inch); Sheet length (optional) (inch). Leave optional unknown values blank rather than substituting zero.

  2. 02

    Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.

  3. 03

    Review gross blank area required and the secondary outputs. Check the quote boundary, then repeat with the competing specification or order quantity.

Un calcolo che puoi verificare

For this US purchasing example, enter good cartons required 10,000.00 units, actual blank width 19.69 inch, actual blank length 15.75 inch, board gsm 300.00 g/m². The calculated gross blank area required is 22,660.86 ft². The table lists the remaining inputs and results so the scenario can be checked or reproduced.

Astucci buoni richiesti
10.000 unità
Larghezza effettiva del fustellato
19,6850394 inch
Lunghezza effettiva del fustellato
15,7480315 inch
Grammatura del cartone
300 g/m²
Perdita sull’input lordo
5 %
Larghezza del foglio (facoltativa)
inch
Lunghezza del foglio (facoltativa)
inch
Gross ft² = Good carton target × Blank ft² ÷ (1 − Waste fraction); Board lb = Gross ft² × GSM × 0.0002048161436
Area lorda delle fustelle necessaria22.660,86 ft²

Domande frequenti

Which units should I use for folding carton board requirement?

Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.

Can I compare two folding carton board requirement results directly?

Yes, when both runs use the same specification, purchasing boundary and included charges. Record good cartons required (units), actual blank width (inch), actual blank length (inch), board gsm (g/m²) for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.

Verifica la formula, le unità e le ipotesi visualizzate prima di utilizzare il risultato.

Metodo, unità e ipotesi sui materiali ↗