STRUMENTO 50 / 136

Laminate Cost per ft² Calculator — US Units

Laminate Cost per ft² connects the figures on a US supplier quote with the quantity used by your packaging operation. Build the structure or component list from the supplied specification.

Costruisci la struttura, strato per strato.

Carica esempio

Densità tipica. La densità effettiva varia con il grado e la formulazione della resina; usa dati del fornitore o misurati, se disponibili. La grammatura misurata o del fornitore è generalmente più affidabile di una stima dalla densità. Per materiali personalizzati, inserisci una densità verificata. Non stimare la grammatura della carta con una densità generica.

FILM LAYER 01
16,68g/m²

Estimated using typical PET / BOPET density of 1,39 g/cm³.

FILM LAYER 02
55,20g/m²

Estimated using typical PE (generico) density of 0,9200 g/cm³.

Adesivo, stampa e rivestimenti

Inserisci zero per escludere un’aggiunta. Tutte le grammature sono massa secca trattenuta per metro quadrato. I prezzi dell’adesivo riguardano il prodotto umido fornito; la percentuale solida converte la grammatura secca in consumo umido. Inchiostro, rivestimento e altri prezzi sono per kg secco trattenuto. Esclusi perdite di trasformazione, energia, lavoro e trasporto.

Adhesive interface 1

Grammatura secca trattenuta del rivestimento

Inchiostro

Massa secca trattenuta

Rivestimento

Massa secca trattenuta

Altro materiale trattenuto

Massa secca trattenuta

Costo totale del materialeUS$0,1657/ m²
Strati di film
71,88 g/m²
Adesivo, inchiostro, rivestimento e altro
2,00 g/m²
Grammatura totale del laminato
73,88 g/m²
Resa del laminato
66,09 ft²/lb
Solo spessore del film
2,83 mil
Peso per 1.000 m²
162,88 lb
Contributo di ogni strato e aggiunta a massa e costo materiale
Strato o aggiuntaGrammatura seccaUSD/m²
1. PET / BOPET16,680,05838
2. PE (generico)55,200,09936
Adhesive interface 12,000,00800
Inchiostro · escluso0,000,00000
Rivestimento · escluso0,000,00000
Altro materiale trattenuto · escluso0,000,00000
Totale73,880,1657

Lo spessore del film esclude adesivo, inchiostro e rivestimento. La resa è teorica, prima degli scarti di processo. Questa stima include densità tipiche della libreria.

Formula e valori sostituiti

Layer GSM = Thickness(mil) × 25.4 × Density(g/cm³). Total GSM includes dry retained additions.

Yield(ft²/lb) = 4,882.427636 ÷ Total GSM. Material $/ft² = GSM × 0.0002048161436 × Material $/lb.

PET / BOPET: 0,4724 mil × 25.4 × 1,39 = 16,68 g/m²; US$1,5876/lb → US$0,00542/ft²

PE (generico): 2,36 mil × 25.4 × 0,9200 = 55,20 g/m²; US$0,8165/lb → US$0,00923/ft²

Total retained basis weight: 73,88 g/m²

Yield: 4,882.427636 ÷ 73,88 = 66,09 ft²/lb

Wet adhesive pounds = Dry pounds ÷ Solids fraction; every addition below is priced on its stated supplied basis.

Adhesive interface 1: US$0,00074/ft²

Costo totale materiale: US$0,01540/ft²

La formula spiegata.

Material cost/ft² = Σ(Layer GSM × 0.0002048161436 × Layer price/lb) + Added material cost/ft²

Build laminate cost per ft² from the actual layer or component records rather than a generic material assumption. Enter dimensional specifications in the displayed US units and keep every price paired with its stated denominator. Review the layer contributions and the finished result together before comparing suppliers.

Come usare questo calcolatore

  1. 01

    Choose the actual materials or components and record their quantities, prices and retained additions.

  2. 02

    Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.

  3. 03

    Review each contribution, then compare the total at the same production quantity and cost boundary.

Un calcolo che puoi verificare

The worked US scenario below keeps the supplied components, cost boundary and physical quantities explicit. Its dollar prices are illustrative, independent of the interactive example.

This independent 2-ply example has a 0.5-mil PET face at 1.39 g/cm³ and 1 PE layer at 1 mil and 0.92 g/cm³ each. Every interface adds 2 dry GSM of adhesive.

PET price
$2/lb
PE price
$1.25/lb
Wet adhesive
$2/lb · 40% solids
Total basis weight
43,02 g/m²
Coverage yield
113,49 ft²/lb
Material cost
US$0,01526/ft²
Layer GSM = mil × 25.4 × density; Yield(ft²/lb) = 4,882.427636 ÷ Total GSM

These are theoretical material figures. Converting loss, labor, energy and freight are excluded. Dry adhesive is retained mass; its purchased wet mass is divided by 0.40.

Domande frequenti

Which units should I use for laminate cost per ft²?

Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.

Can I compare two laminate cost per ft² results directly?

Yes, when both runs use the same specification, purchasing boundary and included charges. Record the component structure and cost basis for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.

Verifica la formula, le unità e le ipotesi visualizzate prima di utilizzare il risultato.

Metodo, unità e ipotesi sui materiali ↗