Laminate Yield Calculator — US Units
Laminate Yield connects the figures on a US supplier quote with the quantity used by your packaging operation. Build the structure or component list from the supplied specification.
Costruisci la struttura, strato per strato.
Densità tipica. La densità effettiva varia con il grado e la formulazione della resina; usa dati del fornitore o misurati, se disponibili. La grammatura misurata o del fornitore è generalmente più affidabile di una stima dalla densità. Per materiali personalizzati, inserisci una densità verificata. Non stimare la grammatura della carta con una densità generica.
Adesivo, stampa e rivestimenti
Inserisci zero per escludere un’aggiunta. Tutte le grammature sono massa secca trattenuta per metro quadrato. Lo spessore di adesivo, inchiostro e rivestimento non è dedotto dalla grammatura.
Grammatura secca trattenuta del rivestimento
Massa secca trattenuta
Massa secca trattenuta
Massa secca trattenuta
- Strati di film
- 71,88 g/m²
- Adesivo, inchiostro, rivestimento e altro
- 2,00 g/m²
- Grammatura totale del laminato
- 73,88 g/m²
- Solo spessore del film
- 2,83 mil
- Peso per 1.000 m²
- 162,88 lb
| Strato o aggiunta | Grammatura secca |
|---|---|
| 1. PET / BOPET | 16,68 |
| 2. PE (generico) | 55,20 |
| Adhesive interface 1 | 2,00 |
| Inchiostro · escluso | 0,00 |
| Rivestimento · escluso | 0,00 |
| Altro materiale trattenuto · escluso | 0,00 |
| Totale | 73,88 |
Lo spessore del film esclude adesivo, inchiostro e rivestimento. La resa è teorica, prima degli scarti di processo. Questa stima include densità tipiche della libreria.
Formula e valori sostituiti
Layer GSM = Thickness(mil) × 25.4 × Density(g/cm³). Total GSM includes dry retained additions.
Yield(ft²/lb) = 4,882.427636 ÷ Total GSM. Material $/ft² = GSM × 0.0002048161436 × Material $/lb.
PET / BOPET: 0,4724 mil × 25.4 × 1,39 = 16,68 g/m²
PE (generico): 2,36 mil × 25.4 × 0,9200 = 55,20 g/m²
Total retained basis weight: 73,88 g/m²
Yield: 4,882.427636 ÷ 73,88 = 66,09 ft²/lb
La formula spiegata.
Build laminate yield from the actual layer or component records rather than a generic material assumption. Enter dimensional specifications in the displayed US units and keep every price paired with its stated denominator. Review the layer contributions and the finished result together before comparing suppliers.
Come usare questo calcolatore
- 01
Choose the actual materials or components and record their quantities, prices and retained additions.
- 02
Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.
- 03
Review each contribution, then compare the total at the same production quantity and cost boundary.
Un calcolo che puoi verificare
The worked US scenario below keeps the supplied components, cost boundary and physical quantities explicit. Its dollar prices are illustrative, independent of the interactive example.
This independent 2-ply example has a 0.5-mil PET face at 1.39 g/cm³ and 1 PE layer at 1 mil and 0.92 g/cm³ each. Every interface adds 2 dry GSM of adhesive.
- PET price
- $2/lb
- PE price
- $1.25/lb
- Wet adhesive
- $2/lb · 40% solids
- Total basis weight
- 43,02 g/m²
- Coverage yield
- 113,49 ft²/lb
- Material cost
- US$0,01526/ft²
Layer GSM = mil × 25.4 × density; Yield(ft²/lb) = 4,882.427636 ÷ Total GSMThese are theoretical material figures. Converting loss, labor, energy and freight are excluded. Dry adhesive is retained mass; its purchased wet mass is divided by 0.40.
Domande frequenti
Which units should I use for laminate yield?
Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.
Can I compare two laminate yield results directly?
Yes, when both runs use the same specification, purchasing boundary and included charges. Record the component structure and cost basis for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.
Verifica la formula, le unità e le ipotesi visualizzate prima di utilizzare il risultato.
Metodo, unità e ipotesi sui materiali ↗