mils to GSM Calculator — US Units
mils to GSM connects the figures on a US supplier quote with the quantity used by your packaging operation. Have film thickness (mil), material density (g/cm³) ready before you start.
Le tue specifiche
Densità tipica. La densità effettiva varia con il grado e la formulazione della resina; usa dati del fornitore o misurati, se disponibili.
Grammatura stimata del film
Estimated using typical PET / BOPET density of 1.39 g/cm³. Actual density varies by resin grade and formulation.
Per un laminato, calcola separatamente ogni strato. Non usare una densità generica per la carta.
GSM = Thickness(mil) × 25.4 × Density(g/cm³)
Film thickness: 0.47244094488188976 mil; Material density: 1.39 g/cm³ → 16,68 g/m²Calcolato dai tuoi dati. Conferma le specifiche con il fornitore.
La formula spiegata.
The result answers a specific purchasing question: Work out mils to gsm with US purchasing units. Enter the actual specification and compare the result on a consistent order basis. Read estimated film gsm in g/m². Width and repeat measurements describe the actual purchased web or blank; a finished pack dimension is only interchangeable when the layout really uses that dimension. Keep input prices on the unit printed next to each price field. The US view converts the physical quantity and its price denominator together, so changing units preserves the calculated material or order value.
Come usare questo calcolatore
- 01
Collect Film thickness (mil); Material density (g/cm³). Leave optional unknown values blank rather than substituting zero.
- 02
Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.
- 03
Review estimated film gsm and the secondary outputs. Check the quote boundary, then repeat with the competing specification or order quantity.
Un calcolo che puoi verificare
For this US purchasing example, enter film thickness 0.4724 mil, material density 1.39 g/cm³. The calculated estimated film gsm is 16.68 g/m². The table lists the remaining inputs and results so the scenario can be checked or reproduced.
- Spessore del film
- 0,472440945 mil
- Densità del materiale
- 1,39 g/cm³
GSM = Thickness(mil) × 25.4 × Density(g/cm³)Domande frequenti
Which units should I use for mils to gsm?
Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.
Can I compare two mils to gsm results directly?
Yes, when both runs use the same specification, purchasing boundary and included charges. Record film thickness (mil), material density (g/cm³) for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.
Verifica la formula, le unità e le ipotesi visualizzate prima di utilizzare il risultato.
Metodo, unità e ipotesi sui materiali ↗