STRUMENTO 13 / 136

Packaging Cost per Unit Calculator — US Units

Packaging Cost per Unit connects the figures on a US supplier quote with the quantity used by your packaging operation. Have web width (inch), print / pack repeat (inch), lanes across the web (lanes) ready before you start.

Le tue specifiche

lanes
g/m²

Usa la grammatura effettiva del fornitore o misurata, se disponibile.

USD/lb

Solo indicazione della valuta. Nessuna conversione.

%

Percentuale persa dell’input lordo.

I risultati si aggiornano mentre modifichi i dati. Nulla viene salvato finché non lo scegli.
Calcolo in tempo reale

Costo materiale per confezione conforme

US$0,02526/pack
Costo materiale per 1.000 confezioni conformiUS$25,26/1,000 packs
Area nominale per unità1,08 ft²/pack
Area lorda per unità conforme1,13 ft²/pack
Film cost per ft²US$0,02230/ft²

Lo scarto è la percentuale di materiale lordo persa. Fabbisogno lordo = fabbisogno netto ÷ (1 − tasso di scarto).

Solo costo del materiale; esclusi attrezzaggio, trasporto, manodopera di trasformazione e accessori.

Cost/good unit = Width(in) × Repeat(in) ÷ 144 ÷ Lanes ÷ (1 − Waste fraction) × Price/ft²

Web width: 31.496062992125985 inch; Print / pack repeat: 9.84251968503937 inch; Lanes across the web: 2 lanes; Film GSM: 80 g/m²; Film price on selected basis: 1.3607771100000001 USD/lb; Process waste: 5 % → US$0,02526/pack

Calcolato dai tuoi dati. Conferma le specifiche con il fornitore.

La formula spiegata.

Cost/good unit = Width(in) × Repeat(in) ÷ 144 ÷ Lanes ÷ (1 − Waste fraction) × Price/ft²

The result answers a specific purchasing question: Work out packaging cost per unit with US purchasing units. Enter the actual specification and compare the result on a consistent order basis. Read material cost per good pack in your selected currency/pack. Width and repeat measurements describe the actual purchased web or blank; a finished pack dimension is only interchangeable when the layout really uses that dimension. Keep input prices on the unit printed next to each price field. The US view converts the physical quantity and its price denominator together, so changing units preserves the calculated material or order value.

Come usare questo calcolatore

  1. 01

    Collect Web width (inch); Print / pack repeat (inch); Lanes across the web (lanes); Film GSM (g/m²); Film price on selected basis (currency/lb); Process waste (%). Leave optional unknown values blank rather than substituting zero.

  2. 02

    Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.

  3. 03

    Review material cost per good pack and the secondary outputs. Check the quote boundary, then repeat with the competing specification or order quantity.

Un calcolo che puoi verificare

For this US purchasing example, enter web width 31.50 inch, print / pack repeat 9.84 inch, lanes across the web 2.00 lanes, film gsm 80.00 g/m². The calculated material cost per good pack is US$0.02526/pack. The table lists the remaining inputs and results so the scenario can be checked or reproduced.

Larghezza del nastro
31,496063 inch
Passo di stampa / confezione
9,84251969 inch
Piste affiancate sul nastro
2 lanes
Grammatura del film
80 g/m²
Prezzo del film sulla base scelta
1,36077711 USD/lb
Scarto di processo
5 %
Cost/good unit = Width(in) × Repeat(in) ÷ 144 ÷ Lanes ÷ (1 − Waste fraction) × Price/ft²
Costo materiale per confezione conformeUS$0,02526/pack

Domande frequenti

Which units should I use for packaging cost per unit?

Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.

Can I compare two packaging cost per unit results directly?

Yes, when both runs use the same specification, purchasing boundary and included charges. Record web width (inch), print / pack repeat (inch), lanes across the web (lanes), film gsm (g/m²) for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.

Verifica la formula, le unità e le ipotesi visualizzate prima di utilizzare il risultato.

Metodo, unità e ipotesi sui materiali ↗