PCR / Virgin Resin Blend Cost Calculator — US Units
PCR / Virgin Resin Blend Cost connects the figures on a US supplier quote with the quantity used by your packaging operation. Have pcr fraction of base resin (%), pcr price per lb (currency/lb), virgin resin price per lb (currency/lb) ready before you start.
Le tue specifiche
Solo etichetta dell’unità. Nessuna conversione valutaria.
Costo ponderato della miscela grezza
La percentuale di PCR si riferisce alla miscela di resina base; quella di additivo alla miscela finale completa e sostituisce tale quota di resina base.
Il calcolo dei costi non dimostra prestazioni del prodotto, idoneità normativa o benefici ambientali.
Price/lb = (1 − Additive fraction) × (PCR fraction × PCR price/lb + Virgin fraction × Virgin price/lb) + Additive fraction × Additive price/lb
PCR fraction of base resin: 30 %; PCR price per kg: 0.544310844 USD/lb; Virgin resin price per kg: 0.6803885550000001 USD/lb; Additive / masterbatch fraction of final blend: 0 %; Additive / masterbatch price per kg: 0 USD/lb → US$0,6396/lbCalcolato dai tuoi dati. Conferma le specifiche con il fornitore.
La formula spiegata.
The result answers a specific purchasing question: Work out pcr / virgin resin blend cost with US purchasing units. Enter the actual specification and compare the result on a consistent order basis. Read weighted raw blend cost in your selected currency/lb. Width and repeat measurements describe the actual purchased web or blank; a finished pack dimension is only interchangeable when the layout really uses that dimension. Keep input prices on the unit printed next to each price field. The US view converts the physical quantity and its price denominator together, so changing units preserves the calculated material or order value.
Come usare questo calcolatore
- 01
Collect PCR fraction of base resin (%); PCR price per lb (currency/lb); Virgin resin price per lb (currency/lb); Additive / masterbatch fraction of final blend (%); Additive / masterbatch price per lb (currency/lb). Leave optional unknown values blank rather than substituting zero.
- 02
Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.
- 03
Review weighted raw blend cost and the secondary outputs. Check the quote boundary, then repeat with the competing specification or order quantity.
Un calcolo che puoi verificare
For this US purchasing example, enter pcr fraction of base resin 30.00 %, pcr price per lb US$0.5443/lb, virgin resin price per lb US$0.6804/lb, additive / masterbatch fraction of final blend 0.00 %. The calculated weighted raw blend cost is US$0.6396/lb. The table lists the remaining inputs and results so the scenario can be checked or reproduced.
- Frazione PCR della resina base
- 30 %
- PCR price per lb
- 0,544310844 USD/lb
- Virgin resin price per lb
- 0,680388555 USD/lb
- Frazione di additivo / masterbatch nella miscela finale
- 0 %
- Additive / masterbatch price per lb
- 0 USD/lb
Price/lb = (1 − Additive fraction) × (PCR fraction × PCR price/lb + Virgin fraction × Virgin price/lb) + Additive fraction × Additive price/lbDomande frequenti
Which units should I use for pcr / virgin resin blend cost?
Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.
Can I compare two pcr / virgin resin blend cost results directly?
Yes, when both runs use the same specification, purchasing boundary and included charges. Record pcr fraction of base resin (%), pcr price per lb (currency/lb), virgin resin price per lb (currency/lb), additive / masterbatch fraction of final blend (%) for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.
Verifica la formula, le unità e le ipotesi visualizzate prima di utilizzare il risultato.
Metodo, unità e ipotesi sui materiali ↗