STRUMENTO 34 / 136

Roll Length from Weight Calculator — US Units

Roll Length from Weight connects the figures on a US supplier quote with the quantity used by your packaging operation. Have net film weight (lb), web width (inch), film gsm (g/m²) ready before you start.

Le tue specifiche

g/m²

Usa la grammatura effettiva del fornitore o misurata, se disponibile.

I risultati si aggiornano mentre modifichi i dati. Nulla viene salvato finché non lo scegli.
Calcolo in tempo reale

Lunghezza svolta della bobina

4101,05 ft
Area del film10.763,91 ft²

Sottrai il peso di anima e involucro prima di inserire il peso netto del film.

Length(ft) = Net lb ÷ (Width(in) ÷ 12 × GSM × 0.0002048161436)

Net film weight: 176.36980974790205 lb; Web width: 31.496062992125985 inch; Film GSM: 80 g/m² → 4101,05 ft

Calcolato dai tuoi dati. Conferma le specifiche con il fornitore.

La formula spiegata.

Length(ft) = Net lb ÷ (Width(in) ÷ 12 × GSM × 0.0002048161436)

The result answers a specific purchasing question: Work out roll length from weight with US purchasing units. Enter the actual specification and compare the result on a consistent order basis. Read roll running length in ft. Width and repeat measurements describe the actual purchased web or blank; a finished pack dimension is only interchangeable when the layout really uses that dimension. Keep input prices on the unit printed next to each price field. The US view converts the physical quantity and its price denominator together, so changing units preserves the calculated material or order value.

Come usare questo calcolatore

  1. 01

    Collect Net film weight (lb); Web width (inch); Film GSM (g/m²). Leave optional unknown values blank rather than substituting zero.

  2. 02

    Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.

  3. 03

    Review roll running length and the secondary outputs. Check the quote boundary, then repeat with the competing specification or order quantity.

Un calcolo che puoi verificare

For this US purchasing example, enter net film weight 176.37 lb, web width 31.50 inch, film gsm 80.00 g/m². The calculated roll running length is 4,101.05 ft. The table lists the remaining inputs and results so the scenario can be checked or reproduced.

Peso netto del film
176,36981 lb
Larghezza del nastro
31,496063 inch
Grammatura del film
80 g/m²
Length(ft) = Net lb ÷ (Width(in) ÷ 12 × GSM × 0.0002048161436)
Lunghezza svolta della bobina4101,05 ft

Domande frequenti

Which units should I use for roll length from weight?

Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.

Can I compare two roll length from weight results directly?

Yes, when both runs use the same specification, purchasing boundary and included charges. Record net film weight (lb), web width (inch), film gsm (g/m²) for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.

Verifica la formula, le unità e le ipotesi visualizzate prima di utilizzare il risultato.

Metodo, unità e ipotesi sui materiali ↗