Bottle Cost per Usable Unit Calculator — US Units
Bottle Cost per Usable Unit connects the figures on a US supplier quote with the quantity used by your packaging operation. Have purchased bottles (units), quoted price per bottle (currency), order freight (currency) ready before you start.
사양 입력
통화 표시만 변경합니다. 환율 환산은 하지 않습니다.
예상 사용 가능 병당 원가
공급업체 환급, 교체 또는 잔존품 매각 수익은 가정하지 않습니다.
운송비는 주문 총액입니다. 병 장식, 캡 및 충전 손실은 제외됩니다.
예상 사용 가능 수량은 검사 결과를 보장하지 않습니다.
유효 병 수 = 구매량 × (1 − 불량률/100); 유효 단위 비용 = (구매량 × 단가 + 운송비) ÷ 유효 병 수
Purchased bottles: 10000 units; Quoted price per bottle: 0.2 USD; Order freight: 250 USD; Expected rejected bottles: 2 % → US$0.2296/개입력한 값으로 계산했습니다. 공급업체에 사양을 확인하세요.
계산식을 알기 쉽게.
The result answers a specific purchasing question: Work out bottle cost per usable unit with US purchasing units. Enter the actual specification and compare the result on a consistent order basis. Read cost per expected usable bottle in your selected currency/unit. Width and repeat measurements describe the actual purchased web or blank; a finished pack dimension is only interchangeable when the layout really uses that dimension. Keep input prices on the unit printed next to each price field. The US view converts the physical quantity and its price denominator together, so changing units preserves the calculated material or order value.
계산기 사용 방법
- 01
Collect Purchased bottles (units); Quoted price per bottle (currency); Order freight (currency); Expected rejected bottles (%). Leave optional unknown values blank rather than substituting zero.
- 02
Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.
- 03
Review cost per expected usable bottle and the secondary outputs. Check the quote boundary, then repeat with the competing specification or order quantity.
검증할 수 있는 계산
For this US purchasing example, enter purchased bottles 10,000.00 units, quoted price per bottle US$0.2000, order freight US$250.00, expected rejected bottles 2.00 %. The calculated cost per expected usable bottle is US$0.2296/unit. The table lists the remaining inputs and results so the scenario can be checked or reproduced.
- 구매 병 수
- 10,000 개
- 병당 견적 가격
- 0.2 USD
- 주문 운송비
- 250 USD
- 예상 불량 병 수
- 2 %
Usable bottles = Purchased × (1 − Rejection/100); Usable unit cost = (Purchased × Price + Freight) ÷ Usable bottles자주 묻는 질문
Which units should I use for bottle cost per usable unit?
Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.
Can I compare two bottle cost per usable unit results directly?
Yes, when both runs use the same specification, purchasing boundary and included charges. Record purchased bottles (units), quoted price per bottle (currency), order freight (currency), expected rejected bottles (%) for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.
결과를 사용하기 전에 표시된 공식, 단위 및 가정을 확인하세요.
계산 방법, 단위 및 재료 가정 ↗