Packaging BOM Cost Calculator — US Units
Packaging BOM Cost connects the figures on a US supplier quote with the quantity used by your packaging operation. Build the structure or component list from the supplied specification.
전체 포장을 구성하세요.
Use quantities per 판매 가능 단위. A component shared by 12 products uses a quantity of 1 ÷ 12 (0.083333…). Enter a fractional allocation for shippers or pallets; do not include their whole price for every product.
통화는 표시 단위만 바꾸며 환율 변환은 하지 않습니다.
- 구성품 × 수량
- US$0.5550
- Tooling allocation / 판매 가능 단위
- US$0.00000
- Freight allocation / 판매 가능 단위
- US$0.00000
- 판매 가능 1,000개당 원가
- US$555.00
- 연간 포장 지출
- US$55,500.00
| 구성품 | 수량 | Cost / 판매 가능 단위 | 전체 비중 |
|---|---|---|---|
| 병 | 1.00 | US$0.2100 | 37.84% |
| 펌프 | 1.00 | US$0.1400 | 25.23% |
| 라벨 | 1.00 | US$0.03800 | 6.85% |
| 인쇄 카톤 | 1.00 | US$0.1100 | 19.82% |
| 골판지 운송 상자 | 0.0833 | US$0.02700 | 4.86% |
| 보호 삽입재 | 1.00 | US$0.01800 | 3.24% |
| 팔레트 배부액 | 0.001000 | US$0.01200 | 2.16% |
| 합계 | — | US$0.5550 | 100.00% |
Annual spend = annual finished units × total cost per 판매 가능 단위. It includes the entered per-unit tooling and freight allocations. No waste, filling cost, tax, storage or transport beyond those allocations is inferred.
공식 및 대입값
행 원가 = 완제품 단위당 수량 × 제품 가격 + 금형비 배부액 + 운송비 배부액입니다.
완제품 단위당 총원가 = 모든 행 원가의 합계입니다. 구성품 비중 = 행 원가 ÷ 총원가 × 100입니다.
병: 1.00 × US$0.2100 + US$0.00000 + US$0.00000 = US$0.2100
펌프: 1.00 × US$0.1400 + US$0.00000 + US$0.00000 = US$0.1400
라벨: 1.00 × US$0.03800 + US$0.00000 + US$0.00000 = US$0.03800
인쇄 카톤: 1.00 × US$0.1100 + US$0.00000 + US$0.00000 = US$0.1100
골판지 운송 상자: 0.0833 × US$0.3240 + US$0.00000 + US$0.00000 = US$0.02700
보호 삽입재: 1.00 × US$0.01800 + US$0.00000 + US$0.00000 = US$0.01800
팔레트 배부액: 0.001000 × US$12.00 + US$0.00000 + US$0.00000 = US$0.01200
합계: 0.2100 + 0.1400 + 0.03800 + 0.1100 + 0.02700 + 0.01800 + 0.01200 = US$0.5550 / 판매 가능 단위
1,000개당: 0.5550 × 1,000 = US$555.00
연간: 100,000.00 × 0.5550 = US$55,500.00
계산식을 알기 쉽게.
Build packaging bom cost from the actual layer or component records rather than a generic material assumption. Enter dimensional specifications in the displayed US units and keep every price paired with its stated denominator. Review the layer contributions and the finished result together before comparing suppliers.
계산기 사용 방법
- 01
Choose the actual materials or components and record their quantities, prices and retained additions.
- 02
Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.
- 03
Review each contribution, then compare the total at the same production quantity and cost boundary.
검증할 수 있는 계산
The worked US scenario below keeps the supplied components, cost boundary and physical quantities explicit. Its dollar prices are illustrative, independent of the interactive example.
An illustrative finished pack uses one $0.21 bottle, one $0.14 closure and one $0.03 label. Quantities here are finished pieces, so changing measurement system does not alter them.
$0.21 + $0.14 + $0.03 = $0.38/pack; 100,000 × $0.38 = $38,000Add separately supplied inserts or protection for a protective-kit calculation. Freight, tooling and process loss are excluded from this simple example.
자주 묻는 질문
Which units should I use for packaging bom cost?
Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.
Can I compare two packaging bom cost results directly?
Yes, when both runs use the same specification, purchasing boundary and included charges. Record the component structure and cost basis for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.
결과를 사용하기 전에 표시된 공식, 단위 및 가정을 확인하세요.
계산 방법, 단위 및 재료 가정 ↗