도구 54 / 136

Packs per lb Calculator — US Units

Packs per lb connects the figures on a US supplier quote with the quantity used by your packaging operation. Have web width (inch), print / pack repeat (inch), lanes across the web (lanes) ready before you start.

사양 입력

lanes
g/m²

공급업체의 실제 평량 또는 실측 평량이 있으면 사용하세요.

입력값을 수정하면 결과가 갱신됩니다. 저장을 선택하기 전에는 저장되지 않습니다.
실시간 계산

Nominal packs per lb

56.70 packs/lb
포장당 필름 중량0.0176 lb/pack
포장당 필름 면적1.08 ft²/pack

공정 손실 반영 전 이론 수율입니다. 완제품 앞면 치수뿐 아니라 실제 생산 원단 형상을 사용하세요.

Area/pack(ft²) = Width(in) × Repeat(in) ÷ (144 × Lanes); Packs/lb = 1 ÷ (Area/pack × GSM × 0.0002048161436)

Web width: 31.496062992125985 inch; Print / pack repeat: 9.84251968503937 inch; Lanes across the web: 2 lanes; Film GSM: 80 g/m² → 56.70 packs/lb

입력한 값으로 계산했습니다. 공급업체에 사양을 확인하세요.

계산식을 알기 쉽게.

Area/pack(ft²) = Width(in) × Repeat(in) ÷ (144 × Lanes); Packs/lb = 1 ÷ (Area/pack × GSM × 0.0002048161436)

The result answers a specific purchasing question: Work out packs per lb with US purchasing units. Enter the actual specification and compare the result on a consistent order basis. Read nominal packs per lb in packs/lb. Width and repeat measurements describe the actual purchased web or blank; a finished pack dimension is only interchangeable when the layout really uses that dimension. Keep input prices on the unit printed next to each price field. The US view converts the physical quantity and its price denominator together, so changing units preserves the calculated material or order value.

계산기 사용 방법

  1. 01

    Collect Web width (inch); Print / pack repeat (inch); Lanes across the web (lanes); Film GSM (g/m²). Leave optional unknown values blank rather than substituting zero.

  2. 02

    Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.

  3. 03

    Review nominal packs per lb and the secondary outputs. Check the quote boundary, then repeat with the competing specification or order quantity.

검증할 수 있는 계산

For this US purchasing example, enter web width 31.50 inch, print / pack repeat 9.84 inch, lanes across the web 2.00 lanes, film gsm 80.00 g/m². The calculated nominal packs per lb is 56.70 packs/lb. The table lists the remaining inputs and results so the scenario can be checked or reproduced.

원단 폭
31.496063 inch
인쇄 / 포장 반복 길이
9.84251969 inch
원단 폭 방향의 열 수
2 lanes
필름 평량
80 g/m²
Area/pack(ft²) = Width(in) × Repeat(in) ÷ (144 × Lanes); Packs/lb = 1 ÷ (Area/pack × GSM × 0.0002048161436)
Nominal packs per lb56.70 packs/lb

자주 묻는 질문

Which units should I use for packs per lb?

Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.

Can I compare two packs per lb results directly?

Yes, when both runs use the same specification, purchasing boundary and included charges. Record web width (inch), print / pack repeat (inch), lanes across the web (lanes), film gsm (g/m²) for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.

결과를 사용하기 전에 표시된 공식, 단위 및 가정을 확인하세요.

계산 방법, 단위 및 재료 가정 ↗