도구 34 / 136

Roll Length from Weight Calculator — US Units

Roll Length from Weight connects the figures on a US supplier quote with the quantity used by your packaging operation. Have net film weight (lb), web width (inch), film gsm (g/m²) ready before you start.

사양 입력

g/m²

공급업체의 실제 평량 또는 실측 평량이 있으면 사용하세요.

입력값을 수정하면 결과가 갱신됩니다. 저장을 선택하기 전에는 저장되지 않습니다.
실시간 계산

롤 원단 길이

4,101.05 ft
필름 면적10,763.91 ft²

필름 순중량을 입력하기 전에 지관과 포장재 중량을 빼세요.

Length(ft) = Net lb ÷ (Width(in) ÷ 12 × GSM × 0.0002048161436)

Net film weight: 176.36980974790205 lb; Web width: 31.496062992125985 inch; Film GSM: 80 g/m² → 4,101.05 ft

입력한 값으로 계산했습니다. 공급업체에 사양을 확인하세요.

계산식을 알기 쉽게.

Length(ft) = Net lb ÷ (Width(in) ÷ 12 × GSM × 0.0002048161436)

The result answers a specific purchasing question: Work out roll length from weight with US purchasing units. Enter the actual specification and compare the result on a consistent order basis. Read roll running length in ft. Width and repeat measurements describe the actual purchased web or blank; a finished pack dimension is only interchangeable when the layout really uses that dimension. Keep input prices on the unit printed next to each price field. The US view converts the physical quantity and its price denominator together, so changing units preserves the calculated material or order value.

계산기 사용 방법

  1. 01

    Collect Net film weight (lb); Web width (inch); Film GSM (g/m²). Leave optional unknown values blank rather than substituting zero.

  2. 02

    Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.

  3. 03

    Review roll running length and the secondary outputs. Check the quote boundary, then repeat with the competing specification or order quantity.

검증할 수 있는 계산

For this US purchasing example, enter net film weight 176.37 lb, web width 31.50 inch, film gsm 80.00 g/m². The calculated roll running length is 4,101.05 ft. The table lists the remaining inputs and results so the scenario can be checked or reproduced.

필름 순중량
176.36981 lb
원단 폭
31.496063 inch
필름 평량
80 g/m²
Length(ft) = Net lb ÷ (Width(in) ÷ 12 × GSM × 0.0002048161436)
롤 원단 길이4,101.05 ft

자주 묻는 질문

Which units should I use for roll length from weight?

Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.

Can I compare two roll length from weight results directly?

Yes, when both runs use the same specification, purchasing boundary and included charges. Record net film weight (lb), web width (inch), film gsm (g/m²) for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.

결과를 사용하기 전에 표시된 공식, 단위 및 가정을 확인하세요.

계산 방법, 단위 및 재료 가정 ↗