Set up the US purchasing comparison
Subtract independently confirmed core and wrapping pounds from gross roll mass. Use the resulting net film pounds with measured area and the purchased web width.
Formula and worked US example
Length(ft) = Net lb ÷ (Width(in) ÷ 12 × Basis weight(lb/ft²))
A 275-lb gross roll with 25 lb of tare contains 250 lb of film. At 30 inches wide and 0.010 lb/ft², that is 25,000 ft² and 10,000 ft. A $375 roll quote equals $1.50/lb and $0.0375/ft.
Checks before using the estimate
Core outside diameter is different from bore diameter. Diameter-based footage also depends on actual winding thickness and tightness.
- Use actual supplier prices in place of these independent illustrative dollar quotes. No exchange rate is implied.
- Keep the same technical specification, accepted-output denominator and delivery boundary across alternatives.
자주 묻는 질문
Can I reproduce the US figures in a calculator?
Open a related US calculator below and enter the stated quantities with their matching unit prices. Intermediate values in this article may be rounded.
What should I verify before using this result?
Core outside diameter is different from bore diameter. Diameter-based footage also depends on actual winding thickness and tightness.