FERRAMENTA 70 / 136

Corrugated Box Material Cost Calculator — US Units

Corrugated Box Material Cost connects the figures on a US supplier quote with the quantity used by your packaging operation. Have actual blank width (inch), actual blank length (inch), actual board gsm (g/m²) ready before you start.

As suas especificações

g/m²
USD/lb
USD/unit

Apenas rótulo da unidade. Sem conversão cambial.

Os resultados atualizam-se ao editar. Nada é guardado até decidir fazê-lo.
Cálculo em tempo real

Custo do cartão por recorte

US$0,08000/blank
Custo do cartão por 1.000 caixasUS$80,00/1,000 boxes
Custo incluindo a transformação indicadaUS$0,08000/box
Incluindo transformação por 1.000US$80,00/1,000 boxes

Utiliza as dimensões reais do recorte. As dimensões internas ou externas da embalagem acabada não definem um recorte exato de corte e vinco.

Impressão, corte e colagem são excluídos salvo introdução explícita no campo de transformação adicional. Não inclui perdas de processo.

Blank cost = Area(ft²) × Price/ft²; Price/ft² = Board GSM × 0.0002048161436 × Price/lb

Actual blank width: 19.68503937007874 inch; Actual blank length: 15.748031496062993 inch; Actual board GSM: 500 g/m²; Board price on selected basis: 0.36287389600000003 USD/lb; Converting / printing / gluing per box: 0 USD/unit → US$0,08000/blank

Calculado a partir dos seus dados. Confirme as especificações com o fornecedor.

A fórmula explicada.

Blank cost = Area(ft²) × Price/ft²; Price/ft² = Board GSM × 0.0002048161436 × Price/lb

The result answers a specific purchasing question: Work out corrugated box material cost with US purchasing units. Enter the actual specification and compare the result on a consistent order basis. Read board material cost per blank in your selected currency/blank. Width and repeat measurements describe the actual purchased web or blank; a finished pack dimension is only interchangeable when the layout really uses that dimension. Keep input prices on the unit printed next to each price field. The US view converts the physical quantity and its price denominator together, so changing units preserves the calculated material or order value.

Como utilizar esta calculadora

  1. 01

    Collect Actual blank width (inch); Actual blank length (inch); Actual board GSM (g/m²); Board price on selected basis (currency/lb); Converting / printing / gluing per box (currency/unit). Leave optional unknown values blank rather than substituting zero.

  2. 02

    Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.

  3. 03

    Review board material cost per blank and the secondary outputs. Check the quote boundary, then repeat with the competing specification or order quantity.

Um cálculo que pode verificar

For this US purchasing example, enter actual blank width 19.69 inch, actual blank length 15.75 inch, actual board gsm 500.00 g/m², board price on selected basis US$0.3629/lb. The calculated board material cost per blank is US$0.08000/blank. The table lists the remaining inputs and results so the scenario can be checked or reproduced.

Largura real do molde
19,6850394 inch
Comprimento real do molde
15,7480315 inch
Gramagem real do cartão
500 g/m²
Preço do cartão na base escolhida
0,362873896 USD/lb
Transformação / impressão / colagem por caixa
0 USD/unidade
Blank cost = Area(ft²) × Price/ft²; Price/ft² = Board GSM × 0.0002048161436 × Price/lb
Custo do cartão por recorteUS$0,08000/blank

Perguntas frequentes

Which units should I use for corrugated box material cost?

Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.

Can I compare two corrugated box material cost results directly?

Yes, when both runs use the same specification, purchasing boundary and included charges. Record actual blank width (inch), actual blank length (inch), actual board gsm (g/m²), board price on selected basis (currency/lb) for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.

Verifique a fórmula, as unidades e os pressupostos apresentados antes de utilizar o resultado.

Método, unidades e pressupostos dos materiais ↗