FERRAMENTA 76 / 136

Folding Carton Weight Calculator — US Units

Folding Carton Weight connects the figures on a US supplier quote with the quantity used by your packaging operation. Have actual blank width (inch), actual blank length (inch), actual paperboard gsm (g/m²) ready before you start.

As suas especificações

g/m²
%
Os resultados atualizam-se ao editar. Nada é guardado até decidir fazê-lo.
Cálculo em tempo real

Peso estimado do cartão da embalagem

0,1323 lb/carton
Área real do recorte retangular2,15 ft²
Massa do recorte antes dos vazados0,1323 lb
Material removido pelos vazados indicados0,00 lb

Utiliza as dimensões reais do recorte. As dimensões internas ou externas da embalagem acabada não definem um recorte exato de corte e vinco.

A percentagem de vazado descreve material removido deste recorte, não perdas de rendimento da produção. Adesivos, tinta e acessórios são excluídos salvo inclusão na gramagem medida.

Retained board lb = Blank area(ft²) × GSM × 0.0002048161436 × (1 − Removal fraction)

Actual blank width: 19.68503937007874 inch; Actual blank length: 15.748031496062993 inch; Actual paperboard GSM: 300 g/m²; Blank area removed by cutouts: 0 % → 0,1323 lb/carton

Calculado a partir dos seus dados. Confirme as especificações com o fornecedor.

A fórmula explicada.

Retained board lb = Blank area(ft²) × GSM × 0.0002048161436 × (1 − Removal fraction)

The result answers a specific purchasing question: Work out folding carton weight with US purchasing units. Enter the actual specification and compare the result on a consistent order basis. Read estimated carton board weight in lb/carton. Width and repeat measurements describe the actual purchased web or blank; a finished pack dimension is only interchangeable when the layout really uses that dimension. Keep input prices on the unit printed next to each price field. The US view converts the physical quantity and its price denominator together, so changing units preserves the calculated material or order value.

Como utilizar esta calculadora

  1. 01

    Collect Actual blank width (inch); Actual blank length (inch); Actual paperboard GSM (g/m²); Blank area removed by cutouts (%). Leave optional unknown values blank rather than substituting zero.

  2. 02

    Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.

  3. 03

    Review estimated carton board weight and the secondary outputs. Check the quote boundary, then repeat with the competing specification or order quantity.

Um cálculo que pode verificar

For this US purchasing example, enter actual blank width 19.69 inch, actual blank length 15.75 inch, actual paperboard gsm 300.00 g/m², blank area removed by cutouts 0.00 %. The calculated estimated carton board weight is 0.1323 lb/carton. The table lists the remaining inputs and results so the scenario can be checked or reproduced.

Largura real do molde
19,6850394 inch
Comprimento real do molde
15,7480315 inch
Gramagem real do cartão compacto
300 g/m²
Área do molde removida por recortes
0 %
Retained board lb = Blank area(ft²) × GSM × 0.0002048161436 × (1 − Removal fraction)
Peso estimado do cartão da embalagem0,1323 lb/carton

Perguntas frequentes

Which units should I use for folding carton weight?

Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.

Can I compare two folding carton weight results directly?

Yes, when both runs use the same specification, purchasing boundary and included charges. Record actual blank width (inch), actual blank length (inch), actual paperboard gsm (g/m²), blank area removed by cutouts (%) for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.

Verifique a fórmula, as unidades e os pressupostos apresentados antes de utilizar o resultado.

Método, unidades e pressupostos dos materiais ↗