FERRAMENTA 49 / 136

Laminate Yield Calculator — US Units

Laminate Yield connects the figures on a US supplier quote with the quantity used by your packaging operation. Build the structure or component list from the supplied specification.

Construa a estrutura camada a camada.

Carregar exemplo

Densidade típica. A densidade real varia com o grau e a formulação da resina; utilize dados do fornecedor ou medidos quando disponíveis. A gramagem medida ou do fornecedor é geralmente mais fiável do que uma estimativa pela densidade. Para materiais personalizados, introduza uma densidade verificada. Não estime a gramagem do papel com uma densidade genérica.

FILM LAYER 01
16,68g/m²

Estimated using typical PET / BOPET density of 1,39 g/cm³.

FILM LAYER 02
55,20g/m²

Estimated using typical PE (genérico) density of 0,9200 g/cm³.

Adesivo, impressão e revestimentos

Introduza zero para excluir uma adição. Todas as gramagens são massa seca retida por metro quadrado. A espessura do adesivo, tinta e revestimento não é deduzida da gramagem.

Adhesive interface 1

Gramagem seca retida do revestimento

Tinta

Massa seca retida

Revestimento

Massa seca retida

Outro material retido

Massa seca retida

Rendimento do laminado13,54m² / kg
Camadas de filme
71,88 g/m²
Adesivo, tinta, revestimento e outros
2,00 g/m²
Gramagem total do laminado
73,88 g/m²
Apenas espessura do filme
2,83 mil
Peso por 1.000 m²
162,88 lb
Contribuição de cada camada e adição para a massa
Camada ou adiçãoGramagem seca
1. PET / BOPET16,68
2. PE (genérico)55,20
Adhesive interface 12,00
Tinta · excluído0,00
Revestimento · excluído0,00
Outro material retido · excluído0,00
Total73,88

A espessura do filme exclui adesivo, tinta e revestimento. O rendimento é teórico, antes das perdas de processo. Esta estimativa inclui densidades típicas da biblioteca.

Fórmula e valores substituídos

Layer GSM = Thickness(mil) × 25.4 × Density(g/cm³). Total GSM includes dry retained additions.

Yield(ft²/lb) = 4,882.427636 ÷ Total GSM. Material $/ft² = GSM × 0.0002048161436 × Material $/lb.

PET / BOPET: 0,4724 mil × 25.4 × 1,39 = 16,68 g/m²

PE (genérico): 2,36 mil × 25.4 × 0,9200 = 55,20 g/m²

Total retained basis weight: 73,88 g/m²

Yield: 4,882.427636 ÷ 73,88 = 66,09 ft²/lb

A fórmula explicada.

Yield(ft²/lb) = 4,882.427636 ÷ Total laminate GSM

Build laminate yield from the actual layer or component records rather than a generic material assumption. Enter dimensional specifications in the displayed US units and keep every price paired with its stated denominator. Review the layer contributions and the finished result together before comparing suppliers.

Como utilizar esta calculadora

  1. 01

    Choose the actual materials or components and record their quantities, prices and retained additions.

  2. 02

    Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.

  3. 03

    Review each contribution, then compare the total at the same production quantity and cost boundary.

Um cálculo que pode verificar

The worked US scenario below keeps the supplied components, cost boundary and physical quantities explicit. Its dollar prices are illustrative, independent of the interactive example.

This independent 2-ply example has a 0.5-mil PET face at 1.39 g/cm³ and 1 PE layer at 1 mil and 0.92 g/cm³ each. Every interface adds 2 dry GSM of adhesive.

PET price
$2/lb
PE price
$1.25/lb
Wet adhesive
$2/lb · 40% solids
Total basis weight
43,02 g/m²
Coverage yield
113,49 ft²/lb
Material cost
US$0,01526/ft²
Layer GSM = mil × 25.4 × density; Yield(ft²/lb) = 4,882.427636 ÷ Total GSM

These are theoretical material figures. Converting loss, labor, energy and freight are excluded. Dry adhesive is retained mass; its purchased wet mass is divided by 0.40.

Perguntas frequentes

Which units should I use for laminate yield?

Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.

Can I compare two laminate yield results directly?

Yes, when both runs use the same specification, purchasing boundary and included charges. Record the component structure and cost basis for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.

Verifique a fórmula, as unidades e os pressupostos apresentados antes de utilizar o resultado.

Método, unidades e pressupostos dos materiais ↗