FERRAMENTA 87 / 136

Shrink Sleeve Cost per Unit Calculator — US Units

Shrink Sleeve Cost per Unit connects the figures on a US supplier quote with the quantity used by your packaging operation. Have layflat width (inch), sleeve cut length (inch), film gsm (g/m²) ready before you start.

As suas especificações

g/m²
USD/lb
%
USD/unit

Apenas rótulo da unidade. Sem conversão cambial.

Os resultados atualizam-se ao editar. Nada é guardado até decidir fazê-lo.
Cálculo em tempo real

Custo de filme por manga conforme

US$0,00616/sleeve
Material de filme por 1.000 mangas conformesUS$6,1579/1,000 sleeves
Incluindo a transformação indicada por mangaUS$0,00616/sleeve
Área nominal do tubo aberto0,3229 ft²/sleeve
Massa nominal de filme por manga0,004299 lb/sleeve
Filme bruto alocado por manga conforme0,004525 lb/sleeve
Gramagem de filme utilizada65,00 g/m²

A largura plana é metade da circunferência do tubo aberto, pelo que a área inclui ambos os lados. Sobreposições ou aparas adicionais ficam fora desta geometria nominal.

A perda é a fração perdida da entrada bruta. Necessidade bruta = produção conforme ÷ (1 − perda/100).

Os custos de união, impressão e transformação são separados salvo introdução.

Sleeve ft² = 2 × Layflat width(in) × Cut length(in) ÷ 144; Cost/good sleeve = Sleeve ft² × Price/ft² ÷ (1 − Waste fraction)

Layflat width: 3.937007874015748 inch; Sleeve cut length: 5.905511811023622 inch; Film GSM: 65 g/m²; Film price on selected basis: 1.3607771100000001 USD/lb; Process loss on gross input: 5 %; Additional seaming / printing / conversion per sleeve: 0 USD/unit → US$0,00616/sleeve

Calculado a partir dos seus dados. Confirme as especificações com o fornecedor.

A fórmula explicada.

Sleeve ft² = 2 × Layflat width(in) × Cut length(in) ÷ 144; Cost/good sleeve = Sleeve ft² × Price/ft² ÷ (1 − Waste fraction)

The result answers a specific purchasing question: Work out shrink sleeve cost per unit with US purchasing units. Enter the actual specification and compare the result on a consistent order basis. Read film material cost per good sleeve in your selected currency/sleeve. Width and repeat measurements describe the actual purchased web or blank; a finished pack dimension is only interchangeable when the layout really uses that dimension. Keep input prices on the unit printed next to each price field. The US view converts the physical quantity and its price denominator together, so changing units preserves the calculated material or order value.

Como utilizar esta calculadora

  1. 01

    Collect Layflat width (inch); Sleeve cut length (inch); Film GSM (g/m²); Film thickness (mil); Entered film density (g/cm³); Film price on selected basis (currency/lb); Process loss on gross input (%); Additional seaming / printing / conversion per sleeve (currency/unit). Leave optional unknown values blank rather than substituting zero.

  2. 02

    Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.

  3. 03

    Review film material cost per good sleeve and the secondary outputs. Check the quote boundary, then repeat with the competing specification or order quantity.

Um cálculo que pode verificar

For this US purchasing example, enter layflat width 3.94 inch, sleeve cut length 5.91 inch, film gsm 65.00 g/m², film price on selected basis US$1.3608/lb. The calculated film material cost per good sleeve is US$0.00616/sleeve. The table lists the remaining inputs and results so the scenario can be checked or reproduced.

Largura do tubo achatado
3,93700787 inch
Comprimento de corte da manga
5,90551181 inch
Gramagem do filme
65 g/m²
Preço do filme na base escolhida
1,36077711 USD/lb
Perda sobre a entrada bruta
5 %
Costura / impressão / transformação adicionais por manga
0 USD/unidade
Sleeve ft² = 2 × Layflat width(in) × Cut length(in) ÷ 144; Cost/good sleeve = Sleeve ft² × Price/ft² ÷ (1 − Waste fraction)
Custo de filme por manga conformeUS$0,00616/sleeve

Perguntas frequentes

Which units should I use for shrink sleeve cost per unit?

Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.

Can I compare two shrink sleeve cost per unit results directly?

Yes, when both runs use the same specification, purchasing boundary and included charges. Record layflat width (inch), sleeve cut length (inch), film gsm (g/m²), film thickness (mil) for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.

Verifique a fórmula, as unidades e os pressupostos apresentados antes de utilizar o resultado.

Método, unidades e pressupostos dos materiais ↗