FERRAMENTA 96 / 136

Thermoformed Tray Cost per 1,000 Calculator — US Units

Thermoformed Tray Cost per 1,000 connects the figures on a US supplier quote with the quantity used by your packaging operation. Have actual finished tray weight (lb), resin price per lb (currency/lb), process loss on gross input (%) ready before you start.

As suas especificações

USD/lb
%
USD/unit
unidades
USD

Apenas rótulo da unidade. Sem conversão cambial.

Os resultados atualizam-se ao editar. Nada é guardado até decidir fazê-lo.
Cálculo em tempo real

Custo por 1.000 tabuleiros

US$76,58/1,000 trays
Custo dos tabuleirosUS$0,07658/trays
Custo bruto de resina por 1.000US$31,58/1,000 trays
Resina bruta por 1.000 tabuleiros conformes46,41 lb/1,000 trays
Parcela de transporte por 1.000US$25,00/1,000 trays

A perda é a fração perdida da entrada bruta. Necessidade bruta = produção conforme ÷ (1 − perda/100).

Não são deduzidos automaticamente créditos de resíduos ou compensações por triturado interno. O custo de transformação só é incluído conforme introduzido.

Material/1,000 trays = Part weight(lb) × 1,000 ÷ (1 − Waste fraction) × Resin price/lb

Actual finished tray weight: 0.044092452436975516 lb; Resin price per kg: 0.6803885550000001 USD/lb; Process loss on gross input: 5 %; Conversion cost per good tray: 0.02 USD/unit; Good trays in shipment: 10000 units; Freight for this order: 250 USD → US$76,58/1,000 trays

Calculado a partir dos seus dados. Confirme as especificações com o fornecedor.

A fórmula explicada.

Material/1,000 trays = Part weight(lb) × 1,000 ÷ (1 − Waste fraction) × Resin price/lb

The result answers a specific purchasing question: Work out thermoformed tray cost per 1,000 with US purchasing units. Enter the actual specification and compare the result on a consistent order basis. Read cost per 1,000 trays in your selected currency/1,000 trays. Width and repeat measurements describe the actual purchased web or blank; a finished pack dimension is only interchangeable when the layout really uses that dimension. Keep input prices on the unit printed next to each price field. The US view converts the physical quantity and its price denominator together, so changing units preserves the calculated material or order value.

Como utilizar esta calculadora

  1. 01

    Collect Actual finished tray weight (lb); Resin price per lb (currency/lb); Process loss on gross input (%); Conversion cost per good tray (currency/unit); Good trays in shipment (units); Freight for this order (currency). Leave optional unknown values blank rather than substituting zero.

  2. 02

    Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.

  3. 03

    Review cost per 1,000 trays and the secondary outputs. Check the quote boundary, then repeat with the competing specification or order quantity.

Um cálculo que pode verificar

For this US purchasing example, enter actual finished tray weight 0.0441 lb, resin price per lb US$0.6804/lb, process loss on gross input 5.00 %, conversion cost per good tray US$0.02000/unit. The calculated cost per 1,000 trays is US$76.58/1,000 trays. The table lists the remaining inputs and results so the scenario can be checked or reproduced.

Massa real do tabuleiro acabado
0,0440924524 lb
Resin price per lb
0,680388555 USD/lb
Perda sobre a entrada bruta
5 %
Custo de transformação por tabuleiro bom
0,02 USD/unidade
Tabuleiros bons na expedição
10.000 unidades
Transporte desta encomenda
250 USD
Material/1,000 trays = Part weight(lb) × 1,000 ÷ (1 − Waste fraction) × Resin price/lb
Custo por 1.000 tabuleirosUS$76,58/1,000 trays

Perguntas frequentes

Which units should I use for thermoformed tray cost per 1,000?

Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.

Can I compare two thermoformed tray cost per 1,000 results directly?

Yes, when both runs use the same specification, purchasing boundary and included charges. Record actual finished tray weight (lb), resin price per lb (currency/lb), process loss on gross input (%), conversion cost per good tray (currency/unit) for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.

Verifique a fórmula, as unidades e os pressupostos apresentados antes de utilizar o resultado.

Método, unidades e pressupostos dos materiais ↗