Allow for lost pounds using the retained production fraction

Identify whether the loss rate is a share of gross input or an allowance added to net output. Use the same boundary for startup scrap, trim and rejected production.

Publicado por Nalyquo · ·

Cálculos ilustrativos; não se declara revisão independente especializada. Esta atualização acrescenta informação de publicação e método.

Método e âmbito das referênciasPolítica editorial e correções

Set up the US purchasing comparison

Identify whether the loss rate is a share of gross input or an allowance added to net output. Use the same boundary for startup scrap, trim and rejected production.

Formula and worked US example

Gross lb = Net good-output lb ÷ (1 − Gross-input loss fraction)

To obtain 950 lb of accepted output with 5% gross-input loss, buy 950 ÷ 0.95 = 1,000 lb. Waste is 50 lb. Adding 5% to 950 gives only 997.5 lb and falls short by 2.5 lb.

Checks before using the estimate

Use a qualified or explicitly assumed loss rate. Do not deduct the same rejected material in both the input quantity and the yield allowance.

  • Use actual supplier prices in place of these independent illustrative dollar quotes. No exchange rate is implied.
  • Keep the same technical specification, accepted-output denominator and delivery boundary across alternatives.

Perguntas comuns

Can I reproduce the US figures in a calculator?

Open a related US calculator below and enter the stated quantities with their matching unit prices. Intermediate values in this article may be rounded.

What should I verify before using this result?

Use a qualified or explicitly assumed loss rate. Do not deduct the same rejected material in both the input quantity and the yield allowance.