ИНСТРУМЕНТ 130 / 136

Bottle Cost per Usable Unit Calculator — US Units

Bottle Cost per Usable Unit connects the figures on a US supplier quote with the quantity used by your packaging operation. Have purchased bottles (units), quoted price per bottle (currency), order freight (currency) ready before you start.

Ваши параметры

шт.
USD
USD
%

Только обозначение валюты. Курс не пересчитывается.

Результаты обновляются при изменении данных. Расчёт сохраняется только по вашему выбору.
Расчёт в реальном времени

Стоимость ожидаемой пригодной бутылки

US$0,2296/шт.
Ожидаемое количество пригодных бутылок9 800,00 шт.
Общая стоимость заказаUS$2 250,00

Возмещение поставщика, замены или доходы от реализации остатков не предполагаются.

Доставка — общая сумма по заказу. Декорирование бутылок, крышки и потери розлива исключены.

Ожидаемое количество пригодных единиц не гарантирует результат контроля.

Годные бутылки = Закуплено × (1 − Брак/100); Стоимость годной единицы = (Закуплено × Цена + Доставка) ÷ Годные бутылки

Purchased bottles: 10000 units; Quoted price per bottle: 0.2 USD; Order freight: 250 USD; Expected rejected bottles: 2 % → US$0,2296/шт.

Рассчитано по вашим данным. Подтвердите параметры у поставщика.

Понятное объяснение формулы.

Годные бутылки = Закуплено × (1 − Брак/100); Стоимость годной единицы = (Закуплено × Цена + Доставка) ÷ Годные бутылки

The result answers a specific purchasing question: Work out bottle cost per usable unit with US purchasing units. Enter the actual specification and compare the result on a consistent order basis. Read cost per expected usable bottle in your selected currency/unit. Width and repeat measurements describe the actual purchased web or blank; a finished pack dimension is only interchangeable when the layout really uses that dimension. Keep input prices on the unit printed next to each price field. The US view converts the physical quantity and its price denominator together, so changing units preserves the calculated material or order value.

Как пользоваться калькулятором

  1. 01

    Collect Purchased bottles (units); Quoted price per bottle (currency); Order freight (currency); Expected rejected bottles (%). Leave optional unknown values blank rather than substituting zero.

  2. 02

    Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.

  3. 03

    Review cost per expected usable bottle and the secondary outputs. Check the quote boundary, then repeat with the competing specification or order quantity.

Расчёт, который можно проверить

For this US purchasing example, enter purchased bottles 10,000.00 units, quoted price per bottle US$0.2000, order freight US$250.00, expected rejected bottles 2.00 %. The calculated cost per expected usable bottle is US$0.2296/unit. The table lists the remaining inputs and results so the scenario can be checked or reproduced.

Закупленные бутылки
10 000 шт.
Цена за бутылку по предложению
0,2 USD
Доставка заказа
250 USD
Ожидаемое количество бракованных бутылок
2 %
Usable bottles = Purchased × (1 − Rejection/100); Usable unit cost = (Purchased × Price + Freight) ÷ Usable bottles
Стоимость ожидаемой пригодной бутылкиUS$0,2296/шт.

Частые вопросы

Which units should I use for bottle cost per usable unit?

Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.

Can I compare two bottle cost per usable unit results directly?

Yes, when both runs use the same specification, purchasing boundary and included charges. Record purchased bottles (units), quoted price per bottle (currency), order freight (currency), expected rejected bottles (%) for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.

Перед использованием результата проверьте показанную формулу, единицы измерения и допущения.

Методика, единицы и допущения о материале ↗