ИНСТРУМЕНТ 31 / 136

Film Density from GSM and Thickness Calculator — US Units

Film Density from GSM and Thickness connects the figures on a US supplier quote with the quantity used by your packaging operation. Have film gsm (g/m²), film thickness (mil) ready before you start.

Ваши параметры

g/m²

При наличии используйте фактическую массу на м² от поставщика или по измерению.

Результаты обновляются при изменении данных. Расчёт сохраняется только по вашему выбору.
Расчёт в реальном времени

Кажущаяся плотность плёнки

1,39 g/cm³

Для многослойных структур это эффективное среднее, а не определение отдельных марок полимера.

Погрешность измерения толщины напрямую влияет на рассчитанную плотность.

Density(g/cm³) = GSM ÷ (Thickness(mil) × 25.4)

Film GSM: 16.68 g/m²; Film thickness: 0.47244094488188976 mil → 1,39 g/cm³

Рассчитано по вашим данным. Подтвердите параметры у поставщика.

Понятное объяснение формулы.

Density(g/cm³) = GSM ÷ (Thickness(mil) × 25.4)

The result answers a specific purchasing question: Work out film density from gsm and thickness with US purchasing units. Enter the actual specification and compare the result on a consistent order basis. Read apparent film density in g/cm³. Width and repeat measurements describe the actual purchased web or blank; a finished pack dimension is only interchangeable when the layout really uses that dimension. Keep input prices on the unit printed next to each price field. The US view converts the physical quantity and its price denominator together, so changing units preserves the calculated material or order value.

Как пользоваться калькулятором

  1. 01

    Collect Film GSM (g/m²); Film thickness (mil). Leave optional unknown values blank rather than substituting zero.

  2. 02

    Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.

  3. 03

    Review apparent film density and the secondary outputs. Check the quote boundary, then repeat with the competing specification or order quantity.

Расчёт, который можно проверить

For this US purchasing example, enter film gsm 16.68 g/m², film thickness 0.4724 mil. The calculated apparent film density is 1.39 g/cm³. The table lists the remaining inputs and results so the scenario can be checked or reproduced.

Масса плёнки на м²
16,68 g/m²
Толщина плёнки
0,472440945 мил
Density(g/cm³) = GSM ÷ (Thickness(mil) × 25.4)
Кажущаяся плотность плёнки1,39 g/cm³

Частые вопросы

Which units should I use for film density from gsm and thickness?

Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.

Can I compare two film density from gsm and thickness results directly?

Yes, when both runs use the same specification, purchasing boundary and included charges. Record film gsm (g/m²), film thickness (mil) for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.

Перед использованием результата проверьте показанную формулу, единицы измерения и допущения.

Методика, единицы и допущения о материале ↗