ИНСТРУМЕНТ 50 / 136

Laminate Cost per ft² Calculator — US Units

Laminate Cost per ft² connects the figures on a US supplier quote with the quantity used by your packaging operation. Build the structure or component list from the supplied specification.

Соберите структуру слой за слоем.

Загрузить пример

Типичная плотность. Фактическая плотность зависит от марки и рецептуры полимера; по возможности используйте данные поставщика или измерений. Измеренный граммаж или данные поставщика обычно надёжнее оценки по плотности. Для пользовательских материалов вводите проверенную плотность. Не оценивайте граммаж бумаги по усреднённой плотности.

FILM LAYER 01
16,68g/m²

Estimated using typical PET / BOPET density of 1,39 g/cm³.

FILM LAYER 02
55,20g/m²

Estimated using typical PE (общий) density of 0,9200 g/cm³.

Клей, печать и покрытия

Для исключённого добавления введите ноль. Все значения граммажа — остающаяся сухая масса на квадратный метр. Цены клея относятся к поставляемому жидкому продукту; доля сухого остатка переводит сухое нанесение в жидкий расход. Краска, покрытия и прочее оцениваются за килограмм остающегося сухого материала. Без потерь переработки, энергии, труда и доставки.

Adhesive interface 1

Масса остающегося сухого покрытия на площадь

Краска

Остающаяся сухая масса

Покрытие

Остающаяся сухая масса

Прочий остающийся материал

Остающаяся сухая масса

Полная стоимость материалаUS$0,1657/ m²
Слои плёнки
71,88 g/m²
Клей, краска, покрытие и прочее
2,00 g/m²
Общий граммаж ламината
73,88 g/m²
Выход площади ламината
66,09 ft²/lb
Только толщина плёнки
2,83 mil
Масса 1 000 м²
162,88 lb
Вклад каждого слоя и добавления в массу и стоимость материала
Слой или добавлениеСухой граммажUSD/m²
1. PET / BOPET16,680,05838
2. PE (общий)55,200,09936
Adhesive interface 12,000,00800
Краска · исключено0,000,00000
Покрытие · исключено0,000,00000
Прочий остающийся материал · исключено0,000,00000
Итого73,880,1657

Толщина плёнки не включает клей, краску и покрытие. Выход теоретический, до технологических потерь. Оценка включает типичные плотности из библиотеки.

Формула и подставленные значения

Layer GSM = Thickness(mil) × 25.4 × Density(g/cm³). Total GSM includes dry retained additions.

Yield(ft²/lb) = 4,882.427636 ÷ Total GSM. Material $/ft² = GSM × 0.0002048161436 × Material $/lb.

PET / BOPET: 0,4724 mil × 25.4 × 1,39 = 16,68 g/m²; US$1,5876/lb → US$0,00542/ft²

PE (общий): 2,36 mil × 25.4 × 0,9200 = 55,20 g/m²; US$0,8165/lb → US$0,00923/ft²

Total retained basis weight: 73,88 g/m²

Yield: 4,882.427636 ÷ 73,88 = 66,09 ft²/lb

Wet adhesive pounds = Dry pounds ÷ Solids fraction; every addition below is priced on its stated supplied basis.

Adhesive interface 1: US$0,00074/ft²

Полная стоимость материала: US$0,01540/ft²

Понятное объяснение формулы.

Material cost/ft² = Σ(Layer GSM × 0.0002048161436 × Layer price/lb) + Added material cost/ft²

Build laminate cost per ft² from the actual layer or component records rather than a generic material assumption. Enter dimensional specifications in the displayed US units and keep every price paired with its stated denominator. Review the layer contributions and the finished result together before comparing suppliers.

Как пользоваться калькулятором

  1. 01

    Choose the actual materials or components and record their quantities, prices and retained additions.

  2. 02

    Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.

  3. 03

    Review each contribution, then compare the total at the same production quantity and cost boundary.

Расчёт, который можно проверить

The worked US scenario below keeps the supplied components, cost boundary and physical quantities explicit. Its dollar prices are illustrative, independent of the interactive example.

This independent 2-ply example has a 0.5-mil PET face at 1.39 g/cm³ and 1 PE layer at 1 mil and 0.92 g/cm³ each. Every interface adds 2 dry GSM of adhesive.

PET price
$2/lb
PE price
$1.25/lb
Wet adhesive
$2/lb · 40% solids
Total basis weight
43,02 g/m²
Coverage yield
113,49 ft²/lb
Material cost
US$0,01526/ft²
Layer GSM = mil × 25.4 × density; Yield(ft²/lb) = 4,882.427636 ÷ Total GSM

These are theoretical material figures. Converting loss, labor, energy and freight are excluded. Dry adhesive is retained mass; its purchased wet mass is divided by 0.40.

Частые вопросы

Which units should I use for laminate cost per ft²?

Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.

Can I compare two laminate cost per ft² results directly?

Yes, when both runs use the same specification, purchasing boundary and included charges. Record the component structure and cost basis for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.

Перед использованием результата проверьте показанную формулу, единицы измерения и допущения.

Методика, единицы и допущения о материале ↗