Laminate Yield Calculator — US Units
Laminate Yield connects the figures on a US supplier quote with the quantity used by your packaging operation. Build the structure or component list from the supplied specification.
Соберите структуру слой за слоем.
Типичная плотность. Фактическая плотность зависит от марки и рецептуры полимера; по возможности используйте данные поставщика или измерений. Измеренный граммаж или данные поставщика обычно надёжнее оценки по плотности. Для пользовательских материалов вводите проверенную плотность. Не оценивайте граммаж бумаги по усреднённой плотности.
Клей, печать и покрытия
Для исключённого добавления введите ноль. Все значения граммажа — остающаяся сухая масса на квадратный метр. Толщина клея, краски и покрытия не определяется по их граммажу.
Масса остающегося сухого покрытия на площадь
Остающаяся сухая масса
Остающаяся сухая масса
Остающаяся сухая масса
- Слои плёнки
- 71,88 g/m²
- Клей, краска, покрытие и прочее
- 2,00 g/m²
- Общий граммаж ламината
- 73,88 g/m²
- Только толщина плёнки
- 2,83 mil
- Масса 1 000 м²
- 162,88 lb
| Слой или добавление | Сухой граммаж |
|---|---|
| 1. PET / BOPET | 16,68 |
| 2. PE (общий) | 55,20 |
| Adhesive interface 1 | 2,00 |
| Краска · исключено | 0,00 |
| Покрытие · исключено | 0,00 |
| Прочий остающийся материал · исключено | 0,00 |
| Итого | 73,88 |
Толщина плёнки не включает клей, краску и покрытие. Выход теоретический, до технологических потерь. Оценка включает типичные плотности из библиотеки.
Формула и подставленные значения
Layer GSM = Thickness(mil) × 25.4 × Density(g/cm³). Total GSM includes dry retained additions.
Yield(ft²/lb) = 4,882.427636 ÷ Total GSM. Material $/ft² = GSM × 0.0002048161436 × Material $/lb.
PET / BOPET: 0,4724 mil × 25.4 × 1,39 = 16,68 g/m²
PE (общий): 2,36 mil × 25.4 × 0,9200 = 55,20 g/m²
Total retained basis weight: 73,88 g/m²
Yield: 4,882.427636 ÷ 73,88 = 66,09 ft²/lb
Понятное объяснение формулы.
Build laminate yield from the actual layer or component records rather than a generic material assumption. Enter dimensional specifications in the displayed US units and keep every price paired with its stated denominator. Review the layer contributions and the finished result together before comparing suppliers.
Как пользоваться калькулятором
- 01
Choose the actual materials or components and record their quantities, prices and retained additions.
- 02
Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.
- 03
Review each contribution, then compare the total at the same production quantity and cost boundary.
Расчёт, который можно проверить
The worked US scenario below keeps the supplied components, cost boundary and physical quantities explicit. Its dollar prices are illustrative, independent of the interactive example.
This independent 2-ply example has a 0.5-mil PET face at 1.39 g/cm³ and 1 PE layer at 1 mil and 0.92 g/cm³ each. Every interface adds 2 dry GSM of adhesive.
- PET price
- $2/lb
- PE price
- $1.25/lb
- Wet adhesive
- $2/lb · 40% solids
- Total basis weight
- 43,02 g/m²
- Coverage yield
- 113,49 ft²/lb
- Material cost
- US$0,01526/ft²
Layer GSM = mil × 25.4 × density; Yield(ft²/lb) = 4,882.427636 ÷ Total GSMThese are theoretical material figures. Converting loss, labor, energy and freight are excluded. Dry adhesive is retained mass; its purchased wet mass is divided by 0.40.
Частые вопросы
Which units should I use for laminate yield?
Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.
Can I compare two laminate yield results directly?
Yes, when both runs use the same specification, purchasing boundary and included charges. Record the component structure and cost basis for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.
Перед использованием результата проверьте показанную формулу, единицы измерения и допущения.
Методика, единицы и допущения о материале ↗