Protective Insert Cost per Shipped Unit Calculator — US Units
Protective Insert Cost per Shipped Unit connects the figures on a US supplier quote with the quantity used by your packaging operation. Build the structure or component list from the supplied specification.
Рассчитайте стоимость защитного комплекта.
Use quantities per отгруженная единица. A component shared by 12 products uses a quantity of 1 ÷ 12 (0.083333…). Enter a fractional allocation for shippers or pallets; do not include their whole price for every product.
Валюта меняет только отображаемую единицу. Конвертация по курсу не выполняется.
- Компоненты × количества
- US$0,3350
- Tooling allocation / отгруженная единица
- US$0,00000
- Freight allocation / отгруженная единица
- US$0,00000
- Стоимость на 1 000 отгруженных единиц
- US$335,00
- Годовые расходы на упаковку
- US$33 500,00
| Компонент | Количество | Cost / отгруженная единица | Доля в общей стоимости |
|---|---|---|---|
| Торцевой вкладыш из пены | 2,00 | US$0,1800 | 53,73% |
| Сотовая прокладка | 1,00 | US$0,06000 | 17,91% |
| Защитный уголок | 4,00 | US$0,08000 | 23,88% |
| Доля бумажного наполнителя | 1,00 | US$0,01500 | 4,48% |
| Итого | — | US$0,3350 | 100,00% |
Annual spend = annual finished units × total cost per отгруженная единица. It includes the entered per-unit tooling and freight allocations. No waste, filling cost, tax, storage or transport beyond those allocations is inferred. Стоимость компонентов не подтверждает защитные свойства, штабелируемость или результаты испытаний падением.
Формула и подставленные значения
Стоимость строки = количество на готовую единицу × цена изделия + доля оснастки + доля доставки.
Полная стоимость готовой единицы = сумма стоимостей всех строк. Доля компонента = стоимость строки ÷ полная стоимость × 100.
Торцевой вкладыш из пены: 2,00 × US$0,09000 + US$0,00000 + US$0,00000 = US$0,1800
Сотовая прокладка: 1,00 × US$0,06000 + US$0,00000 + US$0,00000 = US$0,06000
Защитный уголок: 4,00 × US$0,02000 + US$0,00000 + US$0,00000 = US$0,08000
Доля бумажного наполнителя: 1,00 × US$0,01500 + US$0,00000 + US$0,00000 = US$0,01500
Итого: 0,1800 + 0,06000 + 0,08000 + 0,01500 = US$0,3350 / отгруженная единица
На 1 000: 0,3350 × 1,000 = US$335,00
За год: 100 000,00 × 0,3350 = US$33 500,00
Понятное объяснение формулы.
Build protective insert cost per shipped unit from the actual layer or component records rather than a generic material assumption. Enter dimensional specifications in the displayed US units and keep every price paired with its stated denominator. Review the layer contributions and the finished result together before comparing suppliers.
Как пользоваться калькулятором
- 01
Choose the actual materials or components and record their quantities, prices and retained additions.
- 02
Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.
- 03
Review each contribution, then compare the total at the same production quantity and cost boundary.
Расчёт, который можно проверить
The worked US scenario below keeps the supplied components, cost boundary and physical quantities explicit. Its dollar prices are illustrative, independent of the interactive example.
An illustrative finished pack uses one $0.21 bottle, one $0.14 closure and one $0.03 label. Quantities here are finished pieces, so changing measurement system does not alter them.
$0.21 + $0.14 + $0.03 = $0.38/pack; 100,000 × $0.38 = $38,000Add separately supplied inserts or protection for a protective-kit calculation. Freight, tooling and process loss are excluded from this simple example.
Частые вопросы
Which units should I use for protective insert cost per shipped unit?
Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.
Can I compare two protective insert cost per shipped unit results directly?
Yes, when both runs use the same specification, purchasing boundary and included charges. Record the component structure and cost basis for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.
Перед использованием результата проверьте показанную формулу, единицы измерения и допущения.
Методика, единицы и допущения о материале ↗